Preparation; Connections - Panasonic KX-TG5562C Operating Instructions Manual

TG5562C_5566C(e).book Page 12 Friday, May 27, 2005 10:14 AM

Preparation

Connections

Base unit
Raise the antennas.
Charger
Note:
L Base unit: Use only the included Panasonic AC adaptor PQLV1.
L Charger unit: Use only the included Panasonic AC adaptor KX-TCA1.
L The AC adaptor must remain connected at all times. (It is normal for the adaptor to feel
warm during use.)
L The AC adaptor should be connected to a vertically oriented or floor-mounted AC outlet.
Do not connect the AC adaptor to a ceiling-mounted AC outlet, as the weight of the
adaptor may cause it to become disconnected.
L The unit will not work during a power failure. We recommend connecting a standard
telephone to the same telephone line or to the same telephone jack using a T-adaptor.
12
Fasten the AC adaptor cord.
To power outlet (120 V AC, 60 Hz)
AC adaptor
To single-line telephone jack (CA11A)
Telephone line cord
To power outlet (120 V AC, 60 Hz)
AC adaptor
Hook