Defining Settings Using The Scroll And Select Buttons; Setting Flash, Exposure, Picture Type, And Quality; Setting The Self-Timer - Kodak DC265 User Manual

Defining settings using the Scroll and Select buttons

It's likely that you'll change these settings much more often than the settings that
you define through the settings menus. The settings can change from picture to
picture depending on the conditions that exist at the time.
You must be in the Capture mode to change these settings.

Setting flash, exposure, picture type, and quality

To change the Flash, Exposure, Picture Type, and Quality Capture mode
settings:

Setting the self-timer

1 Press Scroll to scroll through the first four
functions on the Status display: Flash,
Exposure, Picture Type, and Quality.
2
When the function you want to change is
flashing, press Select to toggle through the
choices for the active function.
The new selection takes affect if you press
Scroll again to move to another function or
if you do not press a button for 5 seconds.
Press Timer once to activate the self-timer.
The self-timer is deactivated after the picture is
taken.
3 3
3-17