Your Status Lcd; Flash - Kodak DC265 User Manual

Your status LCD

A display on the top of the camera shows the current settings. The following
subsections briefly describe each entry. For information on how to define settings
through the Capture mode menus or the Scroll and Select buttons, refer to
Chapter 3.
The camera must be turned on and in the Capture mode to view and interact
with this display.
Red-eye
Exposure
reduction
compensation
indicator

Flash

Battery
status
Manual mode
Flash
Your camera is equipped with a built-in flash that offers a red-eye reduction
feature. The flash has an effective range of approximately 1.6 to 9.8 ft
(0.68 to 3 m). There are four Flash settings:
Auto—fires the flash automatically when you press the Shutter button and
the camera determines that there is not enough light.
Red-eye—determines that there is not enough light, and fires the flash once
when you press the Shutter button to reduce the chance of red eye, and then
flashes a second time 600 milliseconds later when the picture is taken.
Fill—fires the flash every time you press the Shutter button. Use this
setting when the lighting is poor or when your subject is lit from behind.
Off—turns off the flash. The next time you turn the camera on, the camera
defaults to the Auto flash setting.
2-4
Picture type
IrDA (Infrared)
communication
Quality
Self-timer
Pictures
remaining