Auxiliary Device (Optional); Operating Auxiliary Devices (Optional); Operating An External Dvd Player; Change To The External Dvd Mode - Alpine ICS-X7 Owner's Manual

In-dash app receiver
Hide thumbs Also See for ICS-X7:
Table of Contents

Advertisement

01GB00ICS-X7.book Page 41 Friday, October 12, 2012 9:24 PM
Auxiliary Device
(Optional)

Operating Auxiliary Devices (Optional)

To operate devices connected to the AUX terminals of ICS-X7, follow
the procedure described below.
• Set AUX In to "On." Refer to "Setting the AUX Mode" (page 31).
• Depending on the connected unit, the onscreen buttons may not
work, or their operation may differ.
WARNING
It is dangerous (and illegal in many states) for the
driver to watch TV/video while driving the vehicle. The
driver may be distracted from looking ahead and an
accident could occur.
Install the ICS-X7 correctly so that the driver cannot
watch TV/video unless the vehicle is stopped and the
emergency brake is applied.
If the ICS-X7 is not installed correctly, the driver will
be able to watch TV/video while driving the vehicle
and may be distracted from looking ahead and cause
an accident. The driver or other people could be
severely injured.
• If you try to activate the auxiliary device while driving, the display
will show the warning-Picture off for your safety.
1
Press the Home button.
The Home screen is displayed.
2
1
Touch [AUX1]*
, [AUX2]*
The AUX mode screen is displayed.
1
*
The name which is given as the mode name in "Setting the Primary
AUX Name" (page 31) and "Setting the Secondary AUX Name"
(page 31) is displayed.
2
*
When "Setting the AUX3" (page 32), AUX3 appears when setting
"AUX" only.
01GB06ICS-X7.fm
1
2
or [AUX3]*
.
AUX Operation Screen Display During Video File
Playback
Touch the screen.
The AUX operation screen is displayed.
Example for AUX1, AUX2, AUX3, DVD, Game mode
display
[
Audio]
Calls up the Audio Setup screen. (See "Audio Setup
Operation" on page 18)
[
Display]
Calls up the Display Setup screen. (See "Display Setup
Operation" on page 23)
• The operation screen changes to the visual screen in the
AUX mode for 5 seconds after an operation has been
performed. To hide the AUX operation screen, touch the
video display area.
Touch the display panel to display the operation screen
again.
• Setting the AUX name for EXT.DVD, DVD-CHG and DVB-T mode
displays their individual operation switches and enables operation.
Refer to "Setting the Primary AUX Name" (page 31) and "Setting
the Secondary AUX Name" (page 31).

Operating an External DVD Player

To operate an External DVD player (Optional), set "Setting the Primary
AUX Name" (page 31) or "Setting the Secondary AUX Name"
(page 31) to "EXT.DVD."

Change to the External DVD Mode

1
Press the Home button.
The Home screen is displayed.
2
Touch [EXT.DVD].
The display shows the EXT. DVD mode screen.
ALPINE ICS-X7 68-21057Z38-A (EN)
41
-EN

Advertisement

Table of Contents
loading

Table of Contents