MSI 990XA-GD55 series Installation Manual page 51

▶ DRAM Voltage/ NB Voltage/ CPU Voltage/ CPU-NB Voltage
These tems are used to adjust the voltage of CPU, Memory and chpset.
▶ Overclockng profiles
Press <Enter> to enter the sub-menu.
▶ Overclockng Profile 1/ 2/ 3/ 4/ 5/ 6
Press <Enter> to enter the sub-menu. In the sub-menu, these tems are used to save
the current settngs, and you can to load the settngs from the stored profile.
▶ OC Retry Count
When overclockng has faled, settng ths tem as [1, 3] wll allow system to reboot
1/ 3 tmes wth the same overclocked configuraton. If overclockng has faled every
tme, the system wll restore the defaults.
▶ CPU Specficatons
Press <Enter> to enter the sub-menu. The submenu shows the nformaton of nstalled Press <Enter> to enter the sub-menu. The submenu shows the Press <Enter> to enter the sub-menu. The submenu shows the
CPU.
▶ CPU Technology Support
Press <Enter> to enter the sub-menu. The sub-menu shows the nstalled CPU tech-
nologes. Read only.
▶ MEMORY-Z
Press <Enter> to enter the sub-menu.
▶ DIMM1~4 Memory SPD
Press <Enter> to enter the sub-menu. The sub-menu dsplays the nformatons of
nstalled memory.
ngs from the stored profile. ngs from the stored profile.
tem as [1, 3] tem as [1, 3] w w  ll allow system to reboot ll allow system to reboot
on. If overclock on. If overclock
MS-7640 MS-7640
3-15