Troubleshooting
Camera problems
Status
Camera does not
turn on
Camera does not turn
off
Camera buttons and
controls do not
function
In Review, a blue or
black screen is
displayed instead of
a picture
Pictures remaining
number does not
decrease after taking a
picture
Flash does not fire
Memory card is almost
or entirely full
Battery life is short
Cannot find the
desired picture/video
www.kodak.com/go/support
Solution
■
Make sure the batteries are installed correctly
■
Make sure batteries are new. If batteries are rechargeable, make
sure they are fully charged (see charger documentation).
■
Transfer all pictures to the computer
■
Take another picture.
■
Continue taking pictures. The camera is operating normally.
(The camera estimates the number of pictures remaining after each
picture is taken, based on picture size and content.)
■
Check the flash setting, and change as needed
NOTE: The flash does not fire in all modes.
■
Transfer the pictures to the computer
■
Delete pictures from the card
■
Make sure the correct battery type is installed
■
Wipe the contacts with a pencil eraser before inserting batteries
in the camera.
■
Insert new/charged batteries
■
To view pictures on a card or in internal memory,
Troubleshooting
(see page
(see page
36).
(see page
(see page
36).
(see page
20) or insert a new card.
(see page
(see page
1).
1).
8).
49).
see page
19.
41