Set Supervisor Password; Set User Password - Biostar TF7050-M2 Setup Manual

TF7050-M 2 / TF7025-M 2 BIOS Manual

Set Supervisor Password

Setting the supervisor password will prohibit everyone except the supervisor
from making changes using the CMOS Setup Utility. You will be prompted with
to enter a password.

Set User Password

If the Supervisor Password is not set, then the User Password will function in
the same way as the Supervisor Password. If the Supervisor Password is set and
the User Password is set, the "User" will only be able to view con figurations but
will not be able to change them.
Save & Exit Setup
Save all configuration changes to CMOS (memory) and exit setup. Conf irmation
message will be displayed before proceeding.
Exit Without Sa ving
Abandon all changes made during the current session and exit setup.
Confirmation message will be displayed befo re proceeding.
5