Remote Start Control - Code Alarm ca5154 professional Series Installation Manual

4 - Trunk Output Timing - Red/White Output: Controls the output timing/type of the
RED/WHITE output.
1 Second Pulse - 1 second pulse output.
10 Second - Continuous output for 10 seconds.
20 Seconds - Continuous output for 20 seconds.
Latched until IGN ON - Continuous output until the vehicle's ignition is turned
ON.
Latched ON until Button Press- Continuous output until the activation button
is pressed again.
5- Horn Output Timing: Control the minimum horn pulse time in milliseconds,
some vehicle will require a longer pulse to activate the factory horn.
16mS 1 OmS 30mS 40mS 50mS
6 - Real Panic: Controls the panic out when triggered from the transmitter.
ON - Randomized horn honks when panic is triggered.
OFF - Standard pattern horn honks when panic is triggered.
7 - AUX 1: Controls the VIOLET/BLACK AUX 1 output activation type and timing.
1 Second Pulse- Single 1 second pulse.
Latched- Output stays active until button is pressed again.
Latched untiiiGN ON- Output stays active until the ignition is turned on.
Dome Light Output- Output used for illuminated entry and is not controlled
by the AUX 1 function of the transmitter.
Defrost Output Single Pulse - Single 1 second pulse after start
Defrost Output Latched 5 Minutes- 5 minute continuous output after
remote start.
Feature Bank 4 - Remote Start Control
1 - RF Start Chirp: Turns remote start activation confirmation chirps ON or OFF.
2 - Run Time: Controls the time in minutes that the vehicle will stay running under
control of the remote start until the system times out. The system may also be shut
down at any time by use of the transmitter or system shutdowns.
2014 Voxx Electronics Corporation. All rights reserved. 23