Turning the Hourly Chime ON/OFF
1. While in the Alarm mode, press the RESET button once to set
the hourly chime ON or OFF.
2. When the Hourly Chime Indicator appears, the hourly chime is
ON, and the Watch will beep at the top of each hour.
Using the Chronograph Feature
The Chronograph feature measures elapsed time from a
zero starting point. The maximum counting range of the
chronograph is 99 hours, 59 minutes and 59 seconds.
To use the Chronograph, press the MODE button to select the
Chronograph mode. The Watch can now be used to record an
elapsed length of time.
1. Press the RESET button to reset counter to '0'.
2. Press the ST/STP (start/stop) button once to start timing.
3. Press the ST/STP (start/stop) button to stop timing.
4. To reset the chronograph to '0' press the RESET button.
Using the Countdown Timer Feature
The Countdown Timer tracks a fi xed period of time by counting
down from a user-set time period.
• The Watch is set at a 1 minute default.
The countdown time can be set up to 99 hours, 59 minutes and
59 seconds.
:
6 00
P
Hourly Chime Indicator
AL
2 18 :
Page 9