Kodak EasyShare Z1485 IS Extended User Manual page 56

Troubleshooting
If
Camera does not
recognize
SD/SDHC card.
Camera freezes up
when a card is
inserted or
removed.
Memory card full.
Memory card and
internal memory
full.
The Reset Camera
feature did not
take effect.
Pictures taken on a
tripod are blurry.
Cannot delete
some pictures.
Pictures that have
Kodak Perfect
Touch technology
applied (twice) are
of lower image
quality.
50
Try one or more of the following
■
Purchase a certified SD/SDHC card.
■
Format the card
Caution: Formatting a card deletes all pictures and videos,
including protected files.
■
Insert a card into the slot, then push to seat
■
Turn the camera off, then back on. Make sure the camera is turned off
before inserting or removing a card.
■
Insert a new card
(page 44), or delete pictures
■
Transfer pictures to the computer
internal memory
Caution: Formatting a card deletes all pictures and videos,
including protected files.
■
After using the Reset Camera feature
off and then on again.
■
Occasionally, a tripod interferes with the camera's image stabilizer. In
the Setup menu, set Image Stabilizer to Off
■
If a picture is tagged as a Favorite, a Protect tag is automatically
applied (and remains even if the Favorite tag is removed). A protected
picture cannot be deleted unless the Protect tag is removed
or the card/internal memory is formatted
■
If Perfect Touch technology has been applied to a picture on the
camera, do not apply it again when the picture is on the computer (or
on a Kodak kiosk).
NOTE: Perfect Touch technology is automatically applied to Pictures taken in
Smart Capture mode.
(see page 33).
(page 3), transfer pictures to the computer
(page 15).
(page
(see page 33).
www.kodak.com/go/support
(page 3).
44), then format the card or
(see page 33), turn the camera
(see page 31).
(see page 33).
(page 15)