Toshiba A200 Series User Manual page 97

To select the boot drive you want, follow the steps below.
1. Boot-up your computer and press F12 to enter the boot menu.
2. The boot select screen will be displayed: HDD1, HDD2, CD/DVD, and
3. Use the upper/lower cursor keys to highlight the boot device you want
Keyboard
Wake-up on Keyboard
When this feature is enabled and the computer is in Sleep mode, you can
turn on the computer by pressing any key. It is effective only for the internal
keyboard and only when the computer is in Sleep mode.
Enabled
Disabled
USB
Legacy USB Support
Use this option to enable or disable legacy USB support. If your operating
system does not support USB, you can still use a USB mouse, keyboard,
and floppy disk drive by setting the Legacy USB Support option to enable.
Enabled
Disabled
LAN
Wake-up on LAN
This feature lets the computer's power be turned on when it receives a
wake-up signal from the LAN.
Enabled
Disabled
The Wake-up LAN function support AC adapter mode only, before you
plan to use this function please make sure your AC power source is
connected to system properly.
Do not install or remove an optional memory module while Wake-up on
LAN is enabled.
Downloaded from LpManual.com Manuals
User's Manual
LAN.
and press Enter.
Enables the Wake-up on Keyboard feature.
Disables the Wake-up on Keyboard function
(Default).
Enables Legacy USB Support.
Disables Legacy USB Support.
Enables Wake-up on LAN.
Disables Wake-up on LAN (Default).
HW Setup
7-3