4. Lay the disc, label side up, in the drawer.
Be careful not to touch the lens or the area around it. Doing so could cause
the drive to malfunction.
5. Press gently at the center of the disc until you feel it click into place. The
6. Push the center of the drawer to close it. Press gently until it locks in
If the disc is not seated properly when the drawer is closed, it might be
damaged. Also, the drawer might not open fully when you press the eject
button.
Downloaded from LpManual.com Manuals
User's Manual
disc should lie below the top of the spindle, flush with its base.
place.
Inserting a disc
Closing the drive drawer
Operating Basics
4-14