Lenovo Flex 2 Pro-15 Hardware Maintenance Manual page 57

Note: Applying labels to the base cover
The new base cover FRU is shipped with a kit containing labels of several
kinds. When you replace the base cover, you need to apply the following
labels:
The following labels need to be peeled off from the old base cover, and put
on the new base cover.
Intel or AMD label
VGA label
Energy star label
GML label
Rating label
Barcode label
WLAN label for South Africa
WLAN label for US/CA/TW
WLAN/BT label for Brazil
D side label for Indonesia
BIS label for India
BT label for US/CA/TW or Wlan/BT label for Israel
l
Postel label for Indonesia
m
KCC label for Korea
n
For some models, you also need to apply one or two FCC labels. Check the
old base cover; if it has one or two FCC labels, find duplicates of them in the
label kit and apply them to the new base cover.
For the location of each label, refer to the following figure:
Flex 2 Pro‐15/Edge 15:
a
b
c
Lenovo Flex 2 Pro-15/Edge 15
d
f
l
j k
g
m
n
h i
e
i
53