Lenovo Flex 2 Pro-15/Edge 15 Hardware Maintenance Manual
Figure 10. Removal steps of system board (continued)
Remove two screws
When installing: When attaching the system board to the base cover, adjust the
placement of USB, HDMI and RJ‐45 ports to make sure that they are attached to
the holes on the base cover properly. Improper placement of the ports may cause
damage.
48
f
Step Screw (quantity)
f
M 2.0 × 4.0 mm, flat‐head, nylok‐coated (2)
and remove the system board by arrow
6
7
7
.
6
Color Torque
Silver 1.85±0.15kgfcm