NETGEAR AirCard Quick Start Manual page 5

Step 2: Connect to the
Internet
1. Press and hold the Power key for a
few seconds. Once powered up, the 4G
mobile hotspot automatically connects
to the mobile broadband network.
The first time you turn on the 4G mobile
hotspot, you may be asked to select a language on the LCD:
a. Press the Navigation key to cycle through the available
languages until you see the one you want to use.
b. Press the Power key to select the displayed language.
(You can change the language again later from the
homepage.)
2. The LCD screen displays the message "Connect your computer
to Wi-Fi network" and shows you the Wi-Fi SSID (Network
name) and Wi-Fi Passphrase.
4G
SSID: AirCard-xxxx
Wi-Fi Passphrase: 12345678
To configure your hotspot
go to http://aircard.hotspot
Note: The LCD screen goes into sleep mode to save power. To
wake up the LCD screen, press and release the Power key.
3. On your computer or mobile device, open your Wi-Fi/network
connection manager.
4. Select the Wi-Fi SSID displayed on the LCD screen.
5. When prompted, enter your Wi-Fi Passphrase, as it appears on
the LCD screen.
When the computer or mobile device connects to the 4G
mobile hotspot, a '1' appears beside the Wi-Fi icon on the LCD
screen.
Note: To connect to the mobile broadband network, your SIM
account must be active. If you use a pre-paid or pay-as-
you-go SIM, the account must have a positive balance.
Network
5