NETGEAR AXM752 - ProSafe XFP Transceiver Module Installation Manual

XFP GBIC Module AXM752
The 10 Gigabit small form-factor pluggable (XFP) module provides one
full-duplex 10G bps Ethernet link operation on NETGEAR managed
switches.
Due to the automatic detection capability of the switch, installation of
AXM752 only requires that you plug the module into the module slot.
The module can be inserted or removed while the switch is operational.
Installing a AXM752 Module
Insert the module firmly into the slot that supports the XFP interface.
Make sure the optical cable you use is single mode LC to LC duplex
cable.
Removing a AXM752 Module
Release the module latch by pulling down the handle bar across the
module, and pull the module out of the module slot.
Specifications
Standard IEEE 802.3ae
10GBase LR
Dimensions (HxWxD) 0.33" x 0.72" x 3.07"
(85.mm x 18.35mm x 78.0 mm)
Weight 0.1 lb (47g)
Operating Temperature 32- 158 F (0-70c)
Storage Temperature 32-185 F (0-85c)
Operative relative humidity 6.23 mi (10km)
Operating Distance LC SM for 9um cable
Connectors LC SM for 9um cable
Power Consumption 2.1w (max: 2.5w)
MTBF 459656 hr (52 years)
Safety Certification UL 1950
CSA 22.2 No. 950