Panasonic SC-BT105 Operating Instructions Manual page 11

Set up the radio
[SELECTOR] [X], [W]
[FM/AM]
Numbered
buttons
[6, 5]
[:, 9]
[OK]
[2, 1]
[FM MODE]
[AM BP]
If noise is excessive
When "FM" is selected
Press [FM MODE] to display "MONO".
NOTE
≥Press the button again to cancel the mode.
≥The mode is also canceled when you
change the frequency.
≥This setting can be preset for each broadcasting station. When
"MONO" appears follow procedures 3 and 4 in Presetting
stations manually (
Presetting the radio stations automatically
Up to 30 stations can be set in each band, FM and AM.
1 Press [FM/AM] to select "FM" or "AM".
2 Press [6, 5] to select the lowest frequency
(FM: 87.50, AM: 522).
3 Press and hold [OK].
Release the button when "M" begins to flash.
The tuner starts to preset all the stations it can receive into the channels in ascending
order.
≥"SET OK" is displayed when the stations are set, and the radio tunes to the last preset
station.
≥"ERROR" is displayed when automatic presetting is unsuccessful. Preset the channels
manually.
Manual tuning
1 Press [FM/AM] to select "FM" or "AM".
Main unit: Press [SELECTOR].
2 Press [6, 5] to select the frequency.
Main unit: Press [X] or [W].
≥When a radio broadcast is being received, "TUNED" lights in the
display.
≥When a stereo broadcast is being received, "ST" lights in the
display.
To start automatic tuning, press and hold [6, 5] until the frequency
starts scrolling. Tuning stops when a station is found.
Presetting stations manually
Up to 30 stations can be set in each band, FM and AM.
1 Press [FM/AM] to select "FM" or "AM".
2 Press [6, 5] to select the frequency.
3 Press [OK].
"P" and "M" begin to flash.
4 Press the numbered buttons to enter
preset channel number.
≥To select a 1-digit number
e.g., "1": [1]
≥To select a 2-digit number
e.g., "12": [1]
≥A station previously stored is overwritten when another station is stored in the same
channel preset.
Repeat steps 2 to 4 to set other stations.
Selecting the preset channels
1 Press [FM/AM] to select "FM" or "AM".
2 Press the numbered buttons to select the
channel.
≥To select a 1-digit number
e.g., "1": [1]
≥To select a 2-digit number
e.g., "12": [1]
Alternatively, press [:, 9] or [2, 1] to select the channel.
TUNED
above).
[OK].
[2].
[OK].
[2].
When "AM" is selected
Press [AM BP] to select "AM
MONO
BP1" or "AM BP2" that receives
good reception.
Each time you press the button:
AM BP1(.AM BP2 (BP=Beat Proof)
M
D E
PL
TUNED
TUNED ST
M
e.g., "12"
e.g., "12"
e.g., "AM BP1" is selected.
TUNED
RQT9252
11