Panasonic SC-BT105 Operating Instructions Manual page 36

Changing settings with the Setup menu
Summary of settings
"TV/Device Connection" menu
TV Aspect
Set to match the type of TV connected.
Time Delay
When connected with a Plasma display, adjust if you notice
the audio is out of sync with the video.
HDMI Connection
≥Press [OK] to show the following settings.
HDMI Video Mode
Select "On" when video is output from HDMI AV OUT
terminal.
HDMI Video Format
The items supported by the connected devices are
indicated on the screen as "¢". When any item without
"¢" is selected, the images may be distorted.
BD-Video 24p Output
When playing BD-Video recorded in 24 frames, this unit
displays each frame at 1/24 second intervalssthe same
interval originally shot with the film movie.
≥This item can be set only when the unit is connected to
a TV with an HDMI terminal that supports 1080/24p
input.
HDMI Output Range
Effective when connected to a device that only supports
RGB output.
HDMI Audio Output
This setting selects whether or not to output audio from
HDMI.
≥When this is set to "On", Dolby TrueHD, Dolby Digital
Plus, DTS-HD Master Audio, DTS-HD High Resolution
Audio are output as Dolby Digital from system
speakers.
VIERA Link
Set to use "HDAVI Control" function when connected with
an HDMI cable to a device that supports "HDAVI
Control".
Component Resolution
This sets the video output resolution when using
COMPONENT VIDEO OUT terminals.
TV System
Change the setting to match the equipment you are
connecting with.
≥If picture output is not smooth, change the setting.
≥When NTSC contents are played, they are outputted in
the signal format specified in the "NTSC Contents
Output", irrespective of the settings here.
RQT9252
36
Underlined items are the factory presets.
When connected to a 4:3 aspect TV:
≥4:3 Pan & Scan:Video recorded for a widescreen is played as Pan & Scan
≥4:3 Letterbox: Video recorded for a widescreen is played in the letterbox style.
When connected to a 16:9 widescreen TV:
≥16:9:
≥16:9 full:
≥Auto ≥0ms
≥120ms ≥140ms
When using VIERA Link "HDAVI Control" with "HDAVI Control 3" compatible TV
( 30), select "Auto". Audio and video will automatically be set in sync. (This
works only when "BD/DVD/CD", "SD", "AUX" or "D-IN" is selected as the source.)
≥On:
Images are output from the HDMI terminal in the resolution set in "HDMI
Video Format". Video from COMPONENT VIDEO OUT terminal is output
as "576i/480i".
≥Off
Images are output in the resolution set in "Component Resolution".
≥Automatic: Automatically selects the output resolution best suited to the
connected TV (1080p, 1080i, 720p or 576p/480p).
≥576p/480p ≥720p ≥1080i
When the unit is connected to an amplifier/receiver that does not support the
resolution set on the unit, the video cannot be output properly. In this case, use
the HDMI cable to connect the unit to the TV and then connect the unit to the
amplifier/receiver using a cable other than HDMI.
≥On:
Images in 24p are output in 24p as they are.
(This is effective only when "HDMI Video Format" is set to "Automatic" or
"1080p" and "TV Aspect" is set to "16:9" or "16:9 full".)
However,
– when video is being output at 24 frames, images from any other terminal
than the HDMI terminal may not be output properly.
– when images other than 24p are played, images are output at 60p.
≥Off
≥Standard
≥Enhanced: When the black and white images are not distinct.
≥On:
To output audio through TV speakers (output as 2ch PCM, regardless of
source audio format channel number).
≥Off:
To output audio through system speakers. (The audio is output using the
settings of the main unit.)
≥On:
Select when you want to use "HDAVI Control".
≥Off:
Select when you do not want to use "HDAVI Control".
≥576i/480i ≥576p/480p
480i, 480p: When playing NTSC discs
576i, 576p: When playing PAL discs
≥Even if you select "720p" or "1080i", the video output resolution is restricted to
"576p/480p" when DVD-Video, DivX and BD-Video discs recorded at a rate of
50 frames per second is output from the COMPONENT VIDEO OUT terminals.
≥NTSC:
Select when connecting to a NTSC TV.
≥PAL:
Select when connecting to a PAL or multi-system TV.
(unless prohibited by the producer of the disc). When playing
BD-Video, video is output as "4:3 Letterbox".
Video recorded for 4:3 aspect screen is displayed as a 4:3 ratio
image in the center of the screen.
Video recorded for 4:3 aspect screen is displayed as a
horizontally stretched 16:9 image.
≥20ms ≥40ms ≥60ms
≥1080p
≥720p ≥1080i
≥80ms ≥100ms