Table of Contents
Advertisement
Wear cut-resistant gloves when cleaning the blade
and plates.
Inspect the area on the outside of the bowl and feed
attachment around the handle and magnetic rod to
ensure they are clean. Use a brush on these areas
if necessary.
• BLADE AND CUTTING PLATES
Blades should be kept sharp. It is not necessary
to have a razor edge. However, they will need
sharpening periodically. Replacement of the dull
blades or plates is recommended.
I M P O R T A N T
Check that your detergent is suitable for
cleaning plastic parts. Some washing agents
are too alkaline (e.g. high levels of caustic
soda or ammonia) and totally incompatible
with certain types of plastic, causing them to
deteriorate rapidly.
MAINTENANCE
• MOTOR SEAL
An examination should be made periodically to
assure that a seal against liquids is being
maintained around the motor shaft. The seal can
and should be replaced whenever wear or erosion
is noted or minimally once ever y three to six
months. It is recommended that the seal be replaced
by an authorized repair agency.
• BLADE
Blades should be kept sharp. It is not necessary
to have a razor edge. However, they will need
sharpening periodically. Replacement of the dull
blades or plates is recommended.
• BOWL LOCKING BUSHINGS
If these bushings wear out, the bowl will no longer
be securely attached to the motor base.
Replacement bushings can be ordered: part number
R 3069 U.
TECHNICAL
SPECIFICATIONS
• WEIGHT (Lbs)
net weight
R 401 (without disc)
27.5
• DIMENSIONS (in inches)
E
F
I
D
A
B
C
• WORKING HEIGHT
We recommend that you position the food processor
on a stable worktop so that the upper edge of the
large feed hopper is at a height of between 47 and
51 inches.
• NOISE LEVEL
The equivalent continuous sound level when the
food processor is operating on no-load is less than
70 dB(A).
The R 401 is fitted with a magnetic safety device
and motor braking system.
When you open the bowl lid, the motor stops. To
restart the machine, simply close the lid and press
the green switch.
When you open the lever of the vegetable
preparation attachment, the motor stops. When you
close the lever, the machine restarts.
gross weight
31
The blades and cutting plates are extremely
sharp. Handle with care.
To avoid splashing when running liquids in the
bowl, allow the blades to come to a complete stop
H
before opening the lid.
NOTE: The machines are equipped with a thermal
G
protector which automatically stops the motor if the
A
08
B
12
machine is overloaded. If this happens, allow the
C
09
machine to cool completely before restarting.
1
D
22
/
2
1
E
12
/
J
2
1
F
28
/
2
G
21
1
H
17
/
2
1
I
07
/
2
1
Never try to override or defeat the purpose of,
J
09
/
4
the locking and safety systems.
Never put nonfood objects into the machine
openings.
Only use the food pushers to force the food into
the machine.
Do not overload the appliance.
Never leave the machine running unattended.
SAFETY
W A R N I N G
R E M E M B E R
9
Advertisement
Table of Contents
