Panasonic KX-TC1723CB Operating Instructions Manual page 37

PQQX13225ZA-BM-4 01.7.17 8:57 AM y [ W 37
(REDIAL/PAUSE/FUNCTION)
1 Press
2
While the arrow points to "Save
directory", press
≥The display shows the number of stored items
in the directory.
3 Enter a name, up to 15 characters, with the
dialing buttons,
≥See the steps for entering names and symbols
(p. 38).
≥If a name is not required, press (›) (Next
key) and go to step 5.
(›)
4 Press (Next key).
5 Enter a phone number, up to 22 digits.
≥Each time you press (HOLD/CLEAR), a
character is erased from the right. To erase all
of the digits, press and hold (HOLD/CLEAR).
(›)
6 Press (Next key).
EDIT (fl)
7 Press
≥A beep sounds.
≥To continue storing other items, repeat from step 2.
≥To return to the standby mode, press (OFF).
≥If a pause is required for dialing, (REDIAL/PAUSE/FUNCTION) can be stored in
a phone number counting as one digit (p. 51) in step 5.
≥You can exit the programming mode any time by pressing (OFF).
≥If the display shows "Directory full" in step 2, the display will return to
step 1. Press (OFF) to exit the list. To erase other stored items from the
directory, see page 43.
≥If the display shows "Save error" or an alarm tone sounds in step 7, the item
cannot be stored in the directory. Try again from step 1.
.
EDIT (fl)
.
CH (fi) EDIT (fl)
or .
(Save key).
"
Program
1Save directory
Ringer volume
Directory=
20 items
Enter name
=Next
21
4
Enter name
Tom Jones
=Next
21
4
Enter phone no.
0987654321
=Next
21
4
Tom Jones
0987654321
=Edit
3 1=Save
37