Copying A Photo; Using The Default Settings To Copy A Photo - Kodak HERO 3.1 Extended User Manual

Copying

Copying a photo

Using the default settings to copy a photo

50
You can copy a photo using the default settings, or you can adjust the quantity, size,
quality, and brightness of your copies.
The default settings are either the factory default settings (see
defaults, page 77), or defaults that you have set on the printer (see
page 52).
To copy a photo using the current default settings:
1. Load photo paper into the printer (see
2. Lift the scanner lid, and place the photo face down in the right-front corner of
the scanner glass.
3. Close the lid.
4. Press Home.
5. Press to select Copy Photo.
6. Press Start to begin copying.
www.kodak.com/go/aiosupport
Resetting factory
Loading photo paper, page
Save as Defaults,
24).