Tools And Materials - Sears 721.80513 Installation Instructions Manual

PAR TS, TO 0 L S, MATER IA LS
YOU WILL NEED THE FOLLOWING TOOLS AND MATERIALS FOR THE
INSTALLATION:
Carton or other heavy material for covering the counter top.
Clear Tape Stud Finder or Thin Nail
(for taping the templates to the wall)
Saber Saw (for cutting vent holes for roof
or wall vending)
Phillips Screwdriver (for the screws)
Pencil
Flat Blade Screwdriver (for the bolts)
Measuring Tape (metal preferred)
Keyhole Saw (for the power cord hole)
Electric drill
3/8" and 3/4" wood drill bits
1/2" an d 3/16" ,.,,,,..,:._
drill bits
Plumb Line
Duct Tape
Small Side Cutters or Tin Snips
._)
Gloves
Caulking gun
* If you have brick or masonry walls, you need special hardware and tools.
* The ductwork you need for the installation is not included. All wall and roof caps must have a back-draft
damper.
6