Function Selection - Mitsubishi Electric PAR-21MAA Installation Manual

6

Function Selection

(1) Function selection of remote controller
The setting of the following remote controller functions can be changed using the remote controller function selection mode. Change the setting
when needed.
Item 1
1. Change Language Language setting to display
("CHANGE LANGUAGE")
2. Function limit (1) Operation function limit setting (operation lock) ("LOCKING FUNCTION")
("FUNCTION SELEC- (2) Use of automatic mode setting ("SELECT AUTO MODE")
TION") (3) Temperature range limit setting ("LIMIT TEMP FUNCTION")
3. Mode selection (1) Remote controller main/sub setting ("CONTROLLER MAIN/SUB")
("MODE SELECTION")
(2) Use of clock setting ("CLOCK")
(3) Timer function setting ("WEEKLY TIMER")
(4) Contact number setting for error situation ("CALL.")
(1) Temperature display °C/°F setting ("TEMP MODE °C/°F")
4. Display change
("DISP MODE SETTING") (2) Suction air temperature display setting ("ROOM TEMP DISP SELECT")
(3) Automatic cooling/heating display setting ("AUTO MODE DISP C/H")
[Function selection flowchart]
[1] Stop the air conditioner to start remote controller function selection mode. → [2] Select from item1. → [3] Select from item2. → [4] Make the setting.
(Details are specified in item3) → [5] Setting completed. → [6] Change the display to the normal one. (End)
Normal display (Display when
the air condition is not running)
(Hold down the E button and press the D button for two
seconds.)
* The display cannot be changed during the unit function
selection, the test run and the self diagnosis.
Item 1
Press the G button.
Change Language
("CHANGE LANGUAGE")
Press the
→
Operation function limit setting ("LOCKING FUNCTION")
E button.
Function limit
Use of automatic mode setting ("SELECT AUTO MODE")
("FUNCTION
Press the
SELECTION")
G button.
Temperature range limit setting ("LIMIT TEMP FUNCTION")
Press the Press the
E button. E button.
→
Remote controller main/sub setting ("CONTROLLER MAIN/SUB")
Press the
Use of clock setting ("CLOCK")
G button.
Mode selection
("MODE
Timer function setting ("WEEKLY TIMER")
SELECTION")
Contact number setting for error situation ("CALL.")
Press the
E button.
→
Temperature display °C/°F setting ("TEMP MODE °C/°F")
Press the
Display change G button.
Suction air temperature display setting ("ROOM TEMP DISP SELECT")
("DISP MODE
SETTING")
Automatic cooling/heating display setting ("AUTO MODE DISP C/H")
[Detailed setting]
[4] -1. CHANGE LANGUAGE setting
The language that appears on the dot display can be selected.
• Press the [ MENU] button to change the language.
1 Japanese (JP), 2 English (GB), 3 German (D), 4 Spanish (E),
5 Russian (RU), 6 Italian (I), 7 Chinese (CH), 8 French (F)
[4] -2. Function limit
(1) Operation function limit setting (operation lock)
• To switch the setting, press the [
1 no1 : Operation lock setting is made on all buttons other than
the [ ON/OFF] button.
2 no2 : Operation lock setting is made on all buttons.
3 OFF (Initial setting value): Operation lock setting is not made.
* To make the operation lock setting valid on the normal screen, it is
necessary to press buttons (Press and hold down the [FILTER]
and [ ON/OFF] buttons at the same time for two seconds.) on
the normal screen after the above setting is made.
(2) Use of automatic mode setting
When the remote controller is connected to the unit that has auto-
matic operation mode, the following settings can be made.
• To switch the setting, press the [
1 ON (Initial setting value) : The automatic mode is displayed when
the operation mode is selected.
2 OFF
: The automatic mode is not displayed
when the operation mode is selected.
Item 2
Remote Controller Function
Selection Mode
Item 2
Press the G button.
Press the G button.
Press the G button.
ON/OFF] button.
ON/OFF] button.
Item 3 (Setting content)
• Display in multiple languages is possible.
• Setting the range of operation limit (operation lock)
• Setting the use or non-use of "automatic" operation mode
• Setting the temperature adjustable range (maximum, minimum)
• Selecting main or sub remote controller
* When two remote controllers are connected to one group, one controller must be set to sub.
• Setting the use or non-use of clock function
• Setting the timer type
• Contact number display in case of error
• Setting the telephone number
• Setting the temperature unit (°C or °F) to display
• Setting the use or non-use of the display of indoor (suction) air temperature
• Setting the use or non-use of the display of "Cooling" or "Heating" display during operation
with automatic mode
(Hold down the E button and press
the D button for two seconds.)
* The remote controller records the
setting that is made in this way.
See [4]-1
Item 3
(Setting content)
See [4]-2. (1)
Press the
D button.
See [4]-2. (2)
See [4]-2. (3)
Press the
D button.
See [4]-3. (1)
See [4]-3. (2)
See [4]-3. (3)
See [4]-3. (4)
Press the
D button.
See [4]-4. (1)
See [4]-4. (2)
See [4]-4. (3)
(3) Temperature range limit setting
After this setting is made, the temperature can be changed within the set range.
• To switch the setting, press the [
1 LIMIT TEMP COOL MODE :
The temperature range can be changed on cooling/dry mode.
2 LIMIT TEMP HEAT MODE :
The temperature range can be changed on heating mode.
3 LIMIT TEMP AUTO MODE :
The temperature range can be changed on automatic mode.
4 OFF (initial setting) :The temperature range limit is not active.
* When the setting, other than OFF, is made, the temperature range limit setting
on cooling, heating and automatic mode is made at the same time. However,
the range cannot be limited when the set temperature range has not changed.
• To increase or decrease the temperature, press the [
• To switch the upper limit setting and the lower limit setting, press the [
button. The selected setting will flash and the temperature can be set.
• Settable range
Cooling/Dry mode : Lower limit: 19°C ~ 30°C
Heating mode : Lower limit: 17°C ~ 28°C
Automatic mode : Lower limit: 19°C ~ 28°C
* The settable range varies depending on the unit to connect (Mr. Slim units,
Free-plan units, and intermediate temperature units)
[4] -3. Mode selection setting
(1) Remote controller main/sub setting
• To switch the setting, press the [
1 Main : The controller will be the main controller.
2 Sub : The controller will be the sub controller.
NOTE
Timer operation stops when the display
for remote controller function selection is
changed to the normal one.
Dot display
The language that is selected in
CHANGE LANGUAGE mode
appears on this display. English
is set in this manual.
F
TEMP. ON/OFF
MENU ON/OFF FILTER
E
BACK MONITOR/SET DAY CHECK TEST
PAR-21MAA CLOCK OPERATION
CLEAR
G
C D
ON/OFF] button.
TEMP ( ) or ( )] button.
Upper limit: 30°C ~ 19°C
Upper limit: 28°C ~ 17°C
Upper limit: 28°C ~ 19°C
ON/OFF] button.
I
A
B
H
]
5