Download  Print this page

Mitsubishi Electric PAR-21MAA Installation Manual page 4

City multi control system and mitsubishi mr. slim air conditioners ma deluxe remote controller
Hide thumbs
   

Advertisement

4 If registration is unnecessary, end registration by pressing and holding down the [FILTER] and [
If a new LOSSNAY must be registered, go to step 1. Registration procedure. If you want to confirm another LOSSNAY, go to step 2. Confirmation
procedure. To delete a registered LOSSNAY, go to step 3. Deletion procedure.
< 1. Registration procedure >
5 Set the address of the LOSSNAY and the indoor unit connected by the remote controller you want to register using the [
buttons. (01 to 50)
6 Set the address of the LOSSNAY you want to register using the [
Indoor unit address
7 Press the [TEST] button, and register the set indoor unit address and LOSSNAY address.
- Registration end display
The indoor unit address and "IC" and LOSSNAY address and "LC" are alternately displayed.
- Registration error display
If the address was not correctly registered, the indoor unit address and registered LOSSNAY address are alternately displayed.
Cannot be registered because the registered indoor unit or LOSSNAY does not exist.
Cannot be registered because another LOSSNAY was registered at the registered indoor unit.
< 2. Confirmation procedure >
8 Set the address of the indoor unit connected by the remote controller whose LOSSNAY you want to confirm using the [
buttons. (01 to 50)
<Indoor unit address>
9 Press the [
MENU] button and confirm the LOSSNAY address registered at the set indoor unit address.
- Confirmation end display (When LOSSNAY is connected.)
The indoor unit address and "IC" and registered LOSSNAY address and "LC" are alternately displayed.
- Confirmation end display (When LOSSNAY is not connected.)
Registered indoor unit address does not exist.
< 3. Deletion procedure >
Use this procedure when you want to delete registration of indoor units connected by the remote controller and LOSSNAY.
; Confirm (see 2. Confirmation procedure) the LOSSNAY you want to delete and display the indoor units and LOSSNAY confirmation results.
A Press the [
ON/OFF] button twice and delete registration of the LOSSNAY registered at the set indoor unit.
- Deletion end display
Indoor unit address and "– –" and registered LOSSNAY address and "– –" are alternately displayed.
- Deletion error display
When deletion was not performed properly.
LOSSNAY address
CLOCK (
) and (
)] buttons. (01 to 50)
] buttons at the same time for two seconds.
TEMP. (
TEMP. (
) and (
)]
) and (
)]
4

Advertisement

loading

  Related Manuals for Mitsubishi Electric PAR-21MAA