Latching The Smoke Detector Onto The Base - HomeMatic HM-Sec-SD Mounting Instruction And Operating Manual

Brief button press: teach-in/configuration mode
- LED flashes orange
- Brief button press: exit teach-in/
configuration mode
- LED red: teach-in failed
- LED green: teach-in successful
Long button press: menu
- LED flashes red
- Brief button press: test the wireless network
- Long button press: reset to the initial state
7.3 Latching the smoke detector
onto the base
If no more settings need to be made on the
wireless module, the smoke detector can be
latched onto the base. Latch the smoke detector
onto the base by rotating it clockwise. The red
triangles shown on the base and the smoke
detector will help you to position the detector
correctly.
Please note!
If batteries have not been inserted, it will not
be possible to attach the smoke detector to
the base.
54