Table of Contents
Advertisement
Available languages
Available languages
6.2 Mounting the detector
- Following careful selection of the installation
location, the mounting base first needs to be
removed from the smoke detector. To do this,
rotate the smoke detector anti-clockwise on the
base (on the rear).
- When the base is removed, use its fixing holes to
mark two fixing points on the ceiling.
- Drill two fixing holes, insert plugs and then use two
screws to mount the base.
- Alternatively, if extension cables are to be routed
underneath the smoke detector, for example,
Fixing holes when
mounting with an
installation box
Retainer
for cable
ties
J4�
J2�
J3�
J1�
Optional fixing
using spacers
51
Advertisement
Chapters
Table of Contents
