System - Prime Ultima20 User Manual

3-4-5. SYSTEM

Configure and view system Date/Time, User Authority, Storage, System Log and Configure and view system Date/Time, User Authority, Storage, System Log and
Configuration settings
1) Date/Time
•Time Zone: Choose the time zone of your site. If you using the NTP function, it
must be set correctly to your zone.
•Daylight Saving Time: It enables to adapt the day light saving time automatically.
• Date/Time: This sets product time. Input time by pressing number buttons after
moving cursor with direction buttons. Be careful to move to backward.
The overlapped data will be deleted with warning message.
• NTP (Network Time Protocol) Server: This function is to change the time of DVR
automatically via network. Press the Enter button and using the virtual automatically via network. Press the 'Enter' button and using the virtual
keyboard, type the address of NTP server.
2) User Authority
This sets User authority individually. You can give to each users the authorities such
as setup, search, backup, PTZ, network and camera control.
43
CH 3 How to Use