1. Manuals
  2. Brands
  3. Prime Manuals
  4. DVR
  5. DVST ULTIMA96H-16
  6. User manual

Prime DVST ULTIMA96H-16 User Manual

Prime digital video recorder user's manual
Hide thumbs
Table of Contents

Advertisement

Quick Links

Digital Video Recorder
User's Manual
DVST ULTIMA96H-16/20/32
1

Advertisement

Table of Contents
loading

Related Manuals for Prime DVST ULTIMA96H-16

Summary of Contents for Prime DVST ULTIMA96H-16

  • Page 1 Digital Video Recorder User’s Manual DVST ULTIMA96H-16/20/32...
  • Page 2 Thank you for using our product. 1. This is user's manual for H.264 960H 16/20/32CH Realtime DVR (Digital Video Recorder). 2. This manual contains product specification and introduction, installation guide, operating guide and other necessary matters for easy understanding. Users should read this user's manual carefully for proper use.

  • Page 3: Table Of Contents

    CONTENTS Contents CH 1. Product Introduction 1-1. Product Contents 1-2. Specifications 1-3. Product Characteristics 1-4. Name of Each Part CH 2. Installation Guide and Cautions 2-1. Cautions 2-2. Product Installation 2-2-1. Power Connection 2-2-2. Connecting External Device CH 3. How to Use 3-1.

  • Page 4: Table Of Contents

    CONTENTS Contents 3-5. Firmware Upgrade Trouble Shooting Warranty Appendix A Appendix B Catcheye for Android mobile Appendix C Catcheye for iPhone Appendix D How to Connect Receiver (ULTIMA-X Only) Appendix E How to Connect POS...

  • Page 5: Product Contents

    CH 1 Product Introduction CH1. Product Introduction 1-1. Product Contents After removing packing materials of this product, check whether all following contents are included. Main Body (DVR): This converts the analog video and audio signal to the digital signal and saves on HDD. Adapter: This 12V adapter supplies power to the product.

  • Page 6: Specifications

    CH 1 Product Introduction 1-2. Specifications Image Input/Output : NTSC / PAL Recording Speed : NTSC - 480fps(16ch@960H), 600fps(20ch@960H), 960fps(32ch@960H) Compression Method : H.264 Technology Power : DC12V, 8A (DC adapter) Power Consumption : 96W External Terminal : Video Input - BNC 16CH/BNC 20CH/BNC 32CH Loop out - BNC 16CH/BNC 20CH/No Loop on 32CH Video Output - SPOT 1CH, VGA 1CH, HD output 1CH Audio Input - RCA 16CH...

  • Page 7: Product Characteristics

    CH 1 Product Introduction 1-3. Product Characteristics 1) New Video Configuration optimized 16:9 widescreen This is the revolutionary 16/20/32CH D1 real time DVR for 16:9 widescreen even use the 4:3 video source. Also it displays real HD(1920X1080) resolution, and therefore it provides the most clear image quality and the best security level. 2) High reliability With Embedded hardware and software design, this maintains higher product reliability.
  • Page 8 CH 1 Product Introduction 11) Display information in easy-to-understand information method This enhanced convenience of user by displaying information (date, time, recording method, recording frame number, HDD capacity and others) in monitoring, recording and playing mode in easy-to-understand way. 12) P/T/Z control By built in RS485, various P/T/Z cameras can be used.

  • Page 9: Name Of Each Part

    CH 1 Product Introduction 1-4. Name of Each Part [Front Panel] 2. Enter & Arrow Keys 1. Playback Buttons 3. Number Buttons 6. Jog Shuttle 4. Backup Device 5. IR Window 7. Status Ramps 8. USB 9. Function Keys 1. Playback buttons : It will be used on playback. If you press these buttons in live mode, it will be automatically changed to the Instant Play mode.
  • Page 10 CH 1 Product Introduction 6) ZOOM : It will go to the digital zoom directly. 7) PTZ : It will change to the pan, tilt and zoom control mode from the live mode. 8) LOCK/EXIT : If you want move to the upper menu or exit without saving, press this button.

  • Page 11: Cautions

    CH 2 Installation Method and Cautions CH2. Installation Method and Cautions 2-1. Cautions WARNING Risk of electric shock. Do not open the cover of the product. Servicing of this product by unauthorized personnel is prohibited and will result in a void of warranty. In order to ensure the most stable conditions for power, the use of a UPS (Uninterrupted Power Supply) is recommended.
  • Page 12 CH 2 Installation Method and Cautions - Keep the power cord untwisted. (May cause fire or electric shock.) - Use proper adapter. (Using too much electric power may cause fire or electric shock.) - Do not install it at where exposed to rain and wind and water drop. (May cause fire, electric shock and transformation.) - Keep away from fire.
  • Page 13 CH 2 Installation Method and Cautions Note : This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.

  • Page 14: Product Installation

    CH 2 Installation Method and Cautions 2-2 Product Installation This product may be composed of camera and monitor in default, and additionally the sensor, microphone, speaker and PC for network can be connected if necessary. 2-2-1. Power Connection 1) Connect adapter cable to power connection terminal at rear side. 2) Input AC power to the adapter.
  • Page 15 CH 2 Installation Method and Cautions 2) How to connect external sensor Sensor terminal is composed of 1 input channel and 1 output channel. Sensor out terminal is relay output with 1A, 24V or 0.5A,125V. SIREN SENSOR POWER Sensor In : Connect the sensors. The sensor are composed of both signal and ground terminals, with a voltage difference of 5V.
  • Page 16 CH 2 Installation Method and Cautions 4) Connection Using PTZ camera In case of using pan and tilt cameras, connect PAN/TILT DRIVE to product as shown at following figure. SPEED RS485 CABLE VIDEO CABLE DOME 5) Installing Hard disk drive In case of installing the hard disk drive, open the upper case and install the hard disk drive on the hard bracket.

  • Page 17: General Usage Information

    CH 3 How to Use CH3. How to Use 3-1. General Usage Information The ULTIMA series DVR can be operated with a mouse or remote controller under the four main modes listed below: Live Mode – This is the “main or default” mode. From this mode you can view in real time all currently operating cameras, information regarding camera status, and have access to Pan/Tilt camera controls.

  • Page 18: Live Mode

    CH 3 How to Use 3-2. LIVE Mode In this section you will know how to split the video mode into 1, 4, 6, 8, 9, 12, 16, as well as auto sequencing, PTZ Control, Mouse control, Setup configurations, Backup 3-2-1.
  • Page 19 CH 3 How to Use Date Time Screen Split mode change Sequence activation Hard drive usage Lock/ Unlock indicator Scheduler activation indicator Audio out channel indicator Mute indicator 3) Live Popup Menu By Right-Clicking anywhere on Live Screen, you may view the Live Popup Menu. By using the Live Popup Menu, you can quickly jump to the necessary configuration and settings.

  • Page 20: Live Mode Feature

    CH 3 How to Use 3-2-2. LIVE Mode Feature 1) Split Change video split mode for Live View. 20ch : 1/6/12/20 Split Mode 2) Audio Out You can choose the audio out from this menu. 3) Instant Replay This is very convenient function to catch the abrupt accident. During live viewing, you can go directly to the playback screen.
  • Page 21 CH 3 How to Use 4) Backup There are two ways to enter the backup. The first one is that right click on the live screen, and the second one is that enter directly from ‘Search’ upon playback. If you choose the ‘backup’...
  • Page 22 CH 3 How to Use 5) PTZ (Pan, Tilt and Zoom) It is possible to control the pan and tilt camera by itself. Press the ‘PTZ’ button to enter the PTZ mode. For Menu setting, you can set it by pressing button as displayed at bottom of window.
  • Page 23 CH 3 How to Use •Preset : You can enter the preset number using the keypad appearing the preset button or ‘Enter’ button on the remote controller. 6) Zoom Digital zoom of live screen for selected channel. It can be 2x zoom and also control the position by mouse dragging.
  • Page 24 CH 3 How to Use 7) Sequence Sequence Mode On /Off: Switches screens as set on Dwell time under Screen Setup 8) OSD This feature shows current settings of product through GUI (Graphic User Interface) and INFO button at front side is used for this feature. When you turn on power, this will show current date and time, System Lock Setting, HDD usage, Video Loss Check, Sensor ON/OFF, Motion Detection Check, Recording Stat us and Schedule Feature Usage.

  • Page 25: Search Mode

    CH 3 How to Use 3-3. Search Mode Search mode consists of two different modes of searching. The video data can be selected by Time or Event. Search Month / Day / Time selection. Select from Event Log 3-3-1. Search Selection Type 1) Time Based search selection - Select the Date you wish to view by selecting a Date from Calendar - Select time you wish to view by selecting a time from Time Line...
  • Page 26 CH 3 How to Use 2) Event Based Search Selection - Select search date from calendar - Event log will be displayed according to the chosen date - Preview pane above the Event Log will show preview of currently selected video - You may click on Refresh, Option, Backup, Import, To Live, To Play for additional features and options 3) Miscellaneous Search Options...

  • Page 27: Play Mode

    CH 3 How to Use 3-3-2. Play Mode If you choose ‘to play’, the full screen appear. You can control the play speed in here. ▶ Play Screen GUI 1. Split Screen 2. Sequence 3. FB (Fast Backward): FB×2, 4, 8, 16, 32, 64 times faster 4.

  • Page 28: Setup Mode

    CH 3 How to Use 3-4. SETUP Mode Access Setup menu from Right Clicking mouse button to Popup Menu. Configure Display, Record, Device, Network, System which is navigated by clicking on corresponding tab menu at the top of the screen 3-4-1.
  • Page 29 CH 3 How to Use 2) Display Configure and view Monitor, Sequence Dwell Time settings. Monitor : You can choose the monitor between VGA and composite. The screen size will be optimized with the selected monitor. Full Screen 4:3 ratio: Set the full screen ratio from 16:9 to 4:3 for getting original picture. 3) SPOT Control Set the SPOT output .
  • Page 30 CH 3 How to Use 3) Color Control Adjust color control for Video. You can adjust images of camera by channels. - Contrast: Adjust contrast of camera. - Brightness: Adjust brightness of camera. - Saturation: Adjust saturation of camera. - Hue: Adjust color of camera.

  • Page 31: Record

    CH 3 How to Use 3-4-2. Record Configure and view Event In, Record, Group, Holiday settings 1) Record With this menu, you can set the recording variables of DVR and the Scheduler. 1) Rec type: to set conti, event, C/E(conti and event) and none(not recording). 2) Audio Rec: to select audio recording or not.
  • Page 32 CH 3 How to Use ③ Quality: Set picture quality. As quality gets higher, screen quality gets better but saving period gets shorter because file size gets bigger. There are 4 steps quality such as Super, High, Medium and Low To save the setting, choose ‘Apply’...
  • Page 33 CH 3 How to Use 2) Group With this menu, you can set the group using the scheduler. If you choose ‘Group’ tab, you can see the similar screen with ‘Record’. The setting is similar. *In recording, Schedule recording setting is most preferred. So if you activate the weekly scheduler, you cannot record manually.
  • Page 34 CH 3 How to Use 3) Holiday With this menu, you can add the holidays. Use the ‘Add’ button for adding the holiday and use the ‘Delete’ or ‘Delete All’ buttons for removing the existing holidays.
  • Page 35 CH 3 How to Use 4) Event In With this menu, you can set sensor input, motion detection setup. You can also set each channel individually. Each channel may be configured to M (Motion) / S (Sensor) / V (Both) * Summary regarding as Event Recording Motion Event Input...

  • Page 36: Device

    CH 3 How to Use 3-4-3. Device Configure and view Camera, Private Zone, Audio, Motion Detection, Alarm Out, PTZ settings and Controller. 1) Camera You may configure and/or view camera video type and general camera configuration. •Channel Name: You can set the camera name. •Disable : Disable current camera.
  • Page 37 CH 3 How to Use 3) Audio •Audio Out: Select which channel will be heard during Live View. 4) Motion Detection Change settings for Motion Grid selection and Sensitivity Level. You can set multiple area. ① Sensitivity.: 3 steps ② All On/Off : This will activate or deactivate the motion detection of the all area.
  • Page 38 CH 3 How to Use 5) Alarm Out There are 3 types trigger such as sensor input, motion detection and video loss. This setting is related that which trigger will be activate the action such as Relay, Popup, and Buzzer Alarm Out. Each type can have separate Duration value and also linked to selected camera.
  • Page 39 CH 3 How to Use 6) PTZ Configure Pan/Tilt/Zoom camera for control via DVR System and Remote client Driver: Choose Driver to be suitable for PAN/TILT Camera manufacturer. You have to set Comport value according to the connected camera. There are more kinds of camera which can be supported.

  • Page 40: Network

    CH 3 How to Use 3-4-4. NETWORK Configure and view Address, Port, DDNS, E-mail, Control and Status settings 1) Address Configure Network information for Remote client connection • DVR Name : Type the URL of DVR using virtual keyboard. • Type : It can be supported only Ethernet •...
  • Page 41 CH 3 How to Use 3) DDNS This is the function to automatically change the IP of DVR to URL. This product supports the automatic DDNS service using manufacture’s internal server. Also you can choose Dyndns. 4) E-mail You can send the event with snapshot by email. Fill all the information correctly and push the ‘Email Test’.
  • Page 42 5) Control You can individually adjust the resolution and frame rates of video transmission within 600 frames based on CIF. ① Resolution : You can choose CIF or D1 ② FPS: You can adjust the frame rate. ③ Quality: Set picture quality 6) Status This shows the information how many connections and what is the action of each connection.

  • Page 43: System

    CH 3 How to Use 3-4-5. SYSTEM Configure and view system Date/Time, User Authority, Storage, System Log and Configuration settings 1) Date/Time •Time Zone: Choose the time zone of your site. If you using the NTP function, it must be set correctly to your zone. •Daylight Saving Time: It enables to adapt the day light saving time automatically.
  • Page 44 CH 3 How to Use 3) Storage •Display the information and usage of the hard disk drives. If you press the ‘Format’ button on each HDD, only that HDD will be formatted. •Total : Display all the HDD usage being used for the product. If you press the ‘Enter’ button on here, all the hard disk drives will be formatted.
  • Page 45 CH 3 How to Use 5) System Log You may view all System administration log from Setup  System  System Log. Also you can export the system log and easily send it to technical support for trouble shooting. 6) Configuration Shown at the following screen, from Setup ...

  • Page 46: Firmware Upgrade

    CH 5 Client Program 3-5. Firmware Upgrade After installing the client software, you can find the ‘NetDownloader Program’ in the window programs (Start -> programs -> DVR Client -> NetDownLoader) . Please execute this ‘Net Downloader Program’ to upgrade the firmware of the DVR. After typing the IP and password of the DVR, click the ‘Connect’...
  • Page 47 CH 5 Client Program When you connect the DVR, click the ‘open’ button on the ‘NetDownloader Program ’and select the update file and then press the ‘start’ button. You can see the below download window on the DVR screen. ☞ WARNING!!! Do not turn off the power during download procedure.

  • Page 48: Trouble Shooting

    Trouble Shooting Trouble Shooting Symptom Checkpoint Countermeasure ● Is DVR connected to power ● Can't turn on power ● Connect power cable supply cable? ● There is no image on monitor ● Are DVR and monitor turned ● Turn on power. ●...

  • Page 49: Warranty

    Warranty Warranty This product guarantees free repair based on guarantee regulations only if the malfunction is caused while customers were using it properly. Warranty Period Warranty period begins from the day this product is delivered to customer. Model Name Warranty From .

  • Page 50: Appendix A Cms

    Appendix. A Appendix A. CMS(Client Management Software) A-1. Install CMS for Windows PC CMS is a program for communication between DVR and PC to control signal and video. Insert the enclosed CD, and go to CD-ROM Drive and operate installer file, CMS Installer 32(64).msi, to operate the installer program.
  • Page 51 Appendix. A ▶ System Minimum Requirements •CPU : intel core 2 duo 3.0MHz processor or better •RAM : 1GB or more •LAN : support network adapters 100Mbps or better If there are many connected channels more and more in case of Favorite, CPU share will be more occupied.
  • Page 52 Appendix. A ① Insert the enclosed CD, and go to CD-ROM Drive and operate installer file, CMS Installer 32(64).msi, to operate the installer program. ② Click the Next for installation. If you don’t choose a directory to install program, it will be located at C:\ProgramData\CMS.
  • Page 53 Appendix. A ③ Click the Next for installation. ④ When CMS installation program is processing, you can see the message that CMS is being installed on the screen.
  • Page 54 Appendix. A ⑤ Click the Close after done with all installation tasks. ⑥ CMS installation is completed.
  • Page 55 Appendix. A A-2. Mac CMS Installation This CMS supports Mac OS X 10.6.8 or later. For the first installation, you have to log in your Mac with an administrator account. If you log in with other account, it would be not installed t ①...
  • Page 56 Appendix. A ③ Type your password to install CMS program. ④ Configuring the installation.
  • Page 57 Appendix. A ⑤ After the installation, click the close button.
  • Page 58 Appendix. A . CMS Web installation (CMS for windows) CMS web is a client program using web browser. It supports IE8 or higher. ① Open internet browser on PC ② Type the internet address to connect the DVR you want to connect.
  • Page 59 Appendix. A ③ When you try to connect it at first, Plug-in message will be pop up. Click the Ok. ④ Click run or save to install the set up file.
  • Page 60 Appendix. A ⑤ After done with Plug-in installation, close the internet browser and open it again.
  • Page 61 Appendix. A A-3. CMS Web installation (CMS for Mac) CMS web is a client program using web browser. It supports latest versions of safari and Firefox., but it doesn’t support chrome. ① Open internet browser on PC ② Type the internet address to connect the DVR you want to connect.
  • Page 62 Appendix. A ③ When you try to connect it at first, Plug-in message will be pop up. Click the Ok. ④ Click save to install the set up file.
  • Page 63 Appendix. A ⑤ Move to the path the file is downloaded from Finder. Double click the file. ⑥ Click Continue for installation.
  • Page 64 Appendix. A ⑦ Type your password to install CMS plug in and click Install Software. ⑧ Configuring the installation.
  • Page 65 Appendix. A ⑨ Click Restart to finish installing the software.
  • Page 66 Appendix. A A-4. How to use CMS After done with CMS installation tasks, it created a CMS icon on the desktop. In order to run the CMS, double click the icon on the desktop. Type ID and password to log in. ...
  • Page 67 Appendix. A The initial screen of CMS (Live view) The initial screen of CMS (Search view)
  • Page 68 Appendix. A <CMS Composition> Toolbar View Screen Widget Status bar...
  • Page 69 Appendix. A A.4.1 Widgets You can load many functions of widgets to this area freely, and delete them. • DVR List Widgets: add and connect to DVR devices. Current connected DVR Show a DVR List Disconnected DVR devices Connect a DVR List Connected DVR devices Add DVR devices Delete DVR devices...
  • Page 70 Appendix. A • Device Monitor Widget : Show the information of the added DVR devices. - Show the information of the connected DVR devices. - The information is updated automatically depend on it’s status connected or disconnected. • Calendar Widget : Show the recorded data of date. Calendar shows the recorded data of date on a DVR Device.
  • Page 71 Appendix. A • Pan tilt Control Widget : Control a video of pan tilt camera. 1. Pan tilt Control Zoom Control Focus Control Iris Control Panning and Tilting Control 2. Preset Preset is a function that memorize the temporary position of camera. Set : Memorize a position of a number that you want to use from 1 to 256 with the Set button.
  • Page 72 Appendix. A A.4.2 Tab (Live Tab / Search Tab) You can create taps for live or search video. 1. How to make a new tab Click button on the tab, it will make a Empty tab. Choose a new view. (Live, Search, and Favorite View) A new Live View is created when you click the icon.
  • Page 73 Appendix. A 2. Play Time Line You can check and change the time of recorded video on Search tab. mode (24 hour M mode(60 minute) Change the mode of Time Line - The time is loaded as shown in the figure when you choose the date of existed data from Calendar.
  • Page 74 Appendix. A • Instance Backup Widget : Backup a video. Backup Data information Selected DVR Selected channel of Select time and date Get Estimate capacity Recording stop Recording start - Instance Backup is the function that save the recorded video on the PC from DVR device.
  • Page 75 Appendix. A • Time navigation Widget: Control the playback with Time navigation Widget that can play, pause, play speed, and so on. Set up play speed Play individual frames Play / Pause - Set up play speed (-16 ~ + 16). - Play &...
  • Page 76 Appendix. A 4.4.3 Tool Bar Screen Capture Favorite List Go to Page Add to Previous Favorite Page User Settings Rotate Pages Audio Split Screen Switch to full screen Next Page Change Live/Search View of split mode. (from 1 to 144 ) Capture screen of the current View.
  • Page 77 Appendix. A Rotate pages the current split screen to click the icons, but only the number of current split screen has less than video channels. Rotate pages the current split screen to click the number of page, but only the number of current split screen has less than video channels.
  • Page 78 Appendix. A A.4.4 Configuration Click the icon and Configuration window will be pop up. 1. Localization Language settings will apply after CMS program restart if you change to other language.
  • Page 79 Appendix. A 2. Device - Connect • Device-Connect shows the information of connected devices and is able to add and delete. • Add devices with Add button as Device Tree Widget. • If you change setting on Device-Connect, Device Tree Widget is also immediately updated.
  • Page 80 Appendix. A 3. Device – OSD - Device-OSD : Select options and colors used for Event Status, Date/Time, Frame Rate, Device Camera Name, and Resolution. - If you change setting on Device-OSD, it is immediately updated on screen.
  • Page 81 Appendix. A 4. Rotation / Touring - Rotation/Touring : Set the rotate time of pages. - It skips empty pages, if you check Skips empty pages.
  • Page 82 Appendix. A 5. Export. Import - Export, Import is a function that make other users use the same setting to have Device, Favorite, View, and Client Configuration when other users import the exported setting. - Export : Export a set file to path. - Import : Import a exported file.
  • Page 83 Appendix. A 6. Account - Account : Add / Delete a user account. - You can modify added account when you double click it. - Auto Login : Connect a account that connected account at the last.
  • Page 84 Appendix. A 7. Snapshot Directory - Snapshot Directory : Set a path to be saved a Screen Capture. - Image format : Set a image format BMP or PNG...
  • Page 85 Appendix. A 8. Backup Directory - Backup Directory : Set a path to be saved a backup file. - Backup format : Set a backup format Avi or Exe. If you choose Auto, it will be Exe.
  • Page 86 Appendix. A 9. Change Streaming • Change Streaming : Set a change streaming by number of split screen. • if you set a change streaming to 4 split screen as default, you will see a video with high resolution supporting devices up to 4 spit screen. If you set a split screen more than 4 split, you will see a video with low resolution.
  • Page 87 Appendix. A 4.4.5 Status Bar • Status Bar : Show a status of CMS, current connected account, kind of view, Language, date, and time from the left.

  • Page 88: Appendix B Catcheye For Android Mobile

    Appendix. B Appendix B Catcheye for Android mobile The Catch Eye allows for you to monitor DVRs. It now supports Live mode. Playback mode will be added soon. It is easy and convenient to use. The functions of Catch Eye: •...
  • Page 89 Appendix. B 2. Server Management Enter the appropriate data of your DVR server. Server Name : Name that you want to associate with the DVR server. IP address : IP address or a DDNS name. Server Port : Port number(watch port in DVR setup). User Name : Username(default is "admin").
  • Page 90 Appendix. B Tap the DVR information for a few second in order to modify the sever setting. 3. Live Viewing Tap the DVR server information. The app will show “Please wait” as below. ** Wait Until it receives DVR channel data, it will take a few seconds depending on the network environment.
  • Page 91 Appendix. B The next screen shows the first channel on DVR live view. 4. Multi Channel Viewing If you tap buttons, sliding view will appear in live view so that you can change the channel or division that you want. Max channel depends on server’s max channel, and division type is 1,4 and 16 division mode.(16 division mode works on products support over 16channels.
  • Page 92 Appendix. B 5. Image Saving If you push the left button of phone, ‘Save Image’ will be appeared on bottom screen. If you save a snapshot, you can find in the phone’s Gallery menu. 6. PTZ Control Mode If the PTZ camera is set on the DVR , PTZ button will appear automatically and allow you to control PTZ camera.
  • Page 93 Appendix. B 7. Digital-Zoom Mode Digital zoom in and zoom out will be done by two finger touch and dragging like a smart phone zooming. 8. Search If you tap the button, you can search the recorded file. - Select the wanted date. - Drag the blue time bar as you wanted time Also you can see the multi channel playback by choosing the ‘Division’...

  • Page 94: Appendix C Catcheye For Iphone

    Appendix. C Appendix C Catcheye for iPhone The Catch Eye allows for you to monitor DVRs. It now supports Live mode. Playback mode will be added soon. It is easy and convenient to use. The functions of Catch Eye: • Live View •...
  • Page 95 Appendix. C 2. Server Management Enter the appropriate data of your DVR server. Title : Name that you want to associate with the DVR server. IP address : IP address or a DDNS name. Port : Port number(watch port in DVR setup). Username : Username(default is "admin").
  • Page 96 Appendix. C The "Edit“ button modifies the information of the selected DVR Server. 3. Live Viewing Go ahead and tap the DVR server item in Catcheye screen when you register DVR server. The app will show “loading circle icon” as below. ** Until it received DVR channel data, it takes a few seconds(it depends on network environment.
  • Page 97 Appendix. C The next screen shows DVR live view for first channel. 4. Multi Channel Viewing If you tap button, you can choose 4, 8 and 16ch viewing in live view and you can change channel and division mode. Max channel depends on server’s max channel, and division type is 1 channel, 4 channel and 16 channel mode.
  • Page 98 Appendix. C 5. Save Image You can save the snapshot by tapping button. If you capture image by tapping "Save Image" button, you can find image file in iPhone's photo album menu. 6. PTZ Control Mode If the PTZ camera is set on the DVR , PTZ button will appear automatically and allow you to control PTZ camera.
  • Page 99 Appendix. C 7. Digital-Zoom Mode Digital zoom in and zoom out will be done by two finger touch and dragging like a smart phone zooming. 8. Search If you tap the button, you can search the recorded file. - Select the wanted date from the calendar. - Drag the blue time bar as you wanted time Also you can see the multi channel playback by choosing the ‘Division’...
  • Page 100 Appendix D Appendix D How to Connect Receiver (ULTIMA-X Only) 1. Connect EXTEND FTP cable to Receiver (upto 350ft/100m). Refer to http://en.wikipedia.org/wiki/Twisted_pair about the FTP cable. Connect Monitor and Wired/Wireless Mouse to the Receiver FTP(Foiled Twisted Cable) Receiver 2. Because all the case has different cable length, you should adjust the GAIN and PHASE in Receiver to get a most proper VGA output.
  • Page 101 Appendix D 3.This is the whole diagram.

  • Page 102: Appendix E How To Connect Pos

    Appendix E Appendix E How to Connect POS 1. Connect the USB between POS and DVR. 2. Set the preference of the POS on the DVR. If your POS is in the device list in the text in setup of DVR, you just simply choose that device. If not, you should choose ‘USER’...
  • Page 103 Appendix E 3. To set manually, at first you should know the setting values of the POS. You can get the information from the POS setting screen. 4. If your setting is correct, you can see the below DVR screen on transaction. (This is the popup screen.

This manual is also suitable for:

Dvst ultima96h-20Dvst ultima96h-32

Table of Contents