Ch3. How To Use; General Usage Information - Prime Ultima20 User Manual

CH 3 How to Use

CH3. How to Use

3-1. General Usage Information

The ULTIMA series DVR can be operated with a mouse or remote controller under
the four main modes listed below:
Live Mode – This is the "main or default" mode. From this mode you can view in
real time all currently operating cameras, information regarding camera status, and
have access to Pan/Tilt camera controls. In addition, system status information will
b be shown during live mode, and other modes can be entered from Live mode. h d i li d d th d b t d f Li d
Setup Mode – The user will be able to customize settings for Live viewing,
Recording, Backup, and Camera related devices under the Setup Mode.
Search Mode – In Search Mode, the user will be able to review all recorded footage
in the case that an event must be reviewed using a calendar or event based search.
Backup Mode – In Backup Mode, the user will be able to archive the desired data to k d h ill b bl hi h d i d d
the preferred supported media of their choice (ex. CD, DVD, USB Backup, Remote
Client Software, etc.)
Password Protection – The DVR system will utilize a user ID and password system
to prevent unauthorized usage of this product. Control of the system will only be
possible after entering a proper ID and password as illustrated below. (Factory
Default settings are blank for these fields).
IDs and passwords should be managed by a system administrator, as different users
may be given different levels of access to the DVR.
17