Enter Into The Test Mode; Customer Settings; Manual Capturing; View Images Or Videos - Covert Scouting Cameras CA 3.0 User Manual

Covert CA 3.0 series
After switching the camera on, the motion indication LED (red) light will blink
for about 10s. The 10s is a buffering time before automatically capturing photos or
videos. This gives the operator time for closing and locking the bottom cover,
adjusting the camera on a tree, and walking away.
In TEST mode, it requires a connection to the remote; then you can further
customize your settings. When the user completes the settings, it is required to unplug
the remote to enter into normal use.
connected with the camera, the camera will not work. The camera (the remote
must be unplugged when in ON mode) will take pictures or videos automatically
according to the default settings or preset customer settings.

3.4 Enter into the TEST Mode

Connect the program remote, then switch to the ON position and enter into the
TEST mode. There are three functions in TEST mode: Customer settings, manual
capture, and preview. The program remote is needed in this mode.

3.4.1 Customer Settings

Press MENU on the remote to enter into the menu settings. The camera can be
manually customized which will be displayed on the LCD screen on the camera or on
the external TV monitor. The detailed operations will be described in the "Advanced
Operations" chapter.

3.4.2 Manual Capturing

The TV-in connector should be unconnected, and then press the SHOT button to
manually capture photos or record videos. Also, press the SHOT key to end the
manual capturing of the video.

3.4.3 View Images or Videos

To view an image or video, use a TV or computer monitor which connects to
the camera with a TV cable.
Press OK to view the images. The most recent image will be shown in the LCD
screen on the TV monitor. Press UP to view the previous image and press DOWN for
the next.
The detailed operations like deleting images or videos will be described in
"Advanced Operations" chapter.

3.5 Power Off

Switch the camera to the OFF position to power off the camera. Please note that
even in the OFF mode, the camera still consumes a certain amount of power.
Therefore, please remove the batteries if the camera will not be used for a long period
of time.
3 Quick Introductions
That is, if the program remote is still
Page 5