MATE iSense User Manual page 32

5.2.2.4. C
AMERA
Displays the current camera names on the selected device. Change the names as
desired and click the Save button to apply the new settings.
Note:
In T1 and iSense there will be only one camera available.
5.2.2.5. D -I
E NTERLACE
De-Interlace helps prevent visual defects called interlace artifacts or combing
which occur with moving objects in the image. When there is a lot of motion in a
scene the image may be blurred and objects can be duplicated. In order to tell if a
camera is interlacing is to rapidly move the camera and see whether objects are
duplicated or not. The figure below demonstrates this phenomenon.
If this occurs check the De-Interlace Filter box. The image after the filter is
applied is shown below.
Click the Save button to apply the new setting.
V4.5
N
AMING
F
ILTER
F 12: I
IGURE NTERLACED
F 13: D
IGURE
Rules Manager/Device Explorer
I B
MAGE EFORE
- I
E INTERLACED MAGE
F
ILTER
Page 5-10