MATE iSense User Manual page 27

Table of Contents

Advertisement

5.2.1.1. D
I
EVICE
Displays the IP Settings obtained and the current MAC Address of a device
selected in the List View. All fields are read-only and cannot be edited.
5.2.1.2. D
EVICE
Displays the current configuration settings of a device selected in the List View.
Edit the fields as follows:
 Select either to Obtain all IP settings automatically (DHCP) or to Use the
following IP settings:
Device's IP Address: A unique IP Address conforming to the subnet of
the network where the device is installed.
Device's Subnet Mask: The subnet mask of the network.
Device's Default Gateway: The IP Address of the network gateway (can
be left blank for devices installed within the network).
Device Explorer's IP (WAN): In order to update parameters and firmware
with Device Explorer over a Wide Area Network (WAN), enter a WAN
IP or NAT Address (port 1984) in this field.
Device's Name: A user-defined name making it easier to identify the
device.
Device ID Number: Every device in the Cortex network has a unique
identifier. Enter a number that will be unique to this device (make up a
number): any integer between 1 and 9999 can be entered in this field, as
long as each device in the same Cortex network has a different number.
Device's Video Standard: PAL or NTSC.
Network Type: Optimize the device to work within a Local Area
Network (LAN) or a Wide Area Network (WAN).
Device Type: Displays the device type.
Edit the fields as desired and then click Save to apply the new settings, and
wait for the message box indicating configuration was successful.
Note:
If connecting more than one device to the same Cortex Server, make sure that all
the devices use the same video standard (PAL or NTSC).
5.2.1.3. C
ORTEX
Enter the Cortex server IP Address. If there is no Cortex Server select the
checkbox Set Device as Standalone.
Cortex Server's IP Address: The IP Address of the Cortex Server. This same
IP Address was configured for the Cortex computer when connecting it to the
local network and assigning an IP Address. This same IP Address is filled in
this same field for all the Video Detection Units managed by Cortex in the
network.
V4.5
NFORMATION
S
ETTINGS
S
S
ERVER
ETTINGS
Rules Manager/Device Explorer
Page 5-5

Advertisement

Table of Contents
loading

This manual is also suitable for:

Trigger ng

Table of Contents