Listed below are some of the problems and the possible solutions. If you still
need help, visit our website, listed on the front cover.
The unit cannot take photos or
The unit stops automatically when
Video is unclear
Dark images while recording
Colour of the images is not good
Cross-stripe interference in an
The unit crashes
UNIDEN iGO CAM 600
Ensure that the SD card is
formatted properly and inserted
Use the recommended type of
SD card (4GB Class 10)
Ensure that there are no fingerprints
or dirt on the lens. Ensure that the
lens is always kept clean.
Adjust the Exposure setting.
Set the 'White Balance' setting to
This is due to the light frequency.
Change the light frequency
depending on the local power supply.
Press and hold the 'Reset' button,
with a pin, to reset the unit.