Storage - Toro 23515 Operation Manual

Storage

1. Raise the tines, stop the machine, stop the engine, and
disconnect the spark plug wire.
2. Remove dirt and grime from the entire machine.
Important: You can wash the machine with mild
detergent and water. Do not pressure wash the
machine. Avoid excessive use of water, especially
near the engine and hydrostatic drive.
3. Service the air cleaner; refer to
Servicing the Air Cleaner (page 16).
4. Grease the chains and floating tine assemblies; refer
to Lubrication (page 15).
5. Change the engine oil; refer to
Changing the Engine Oil (page 16).
6. Check and tighten all bolts, nuts, and screws. Repair or
replace any part that is damaged.
7. Paint all scratched or bare metal surfaces. Paint is
available from your Authorized Service Dealer.
8. Store the machine in a clean, dry garage or storage area.
9. Cover the machine to protect it and keep it clean.
22