Maintenance; Recommended Maintenance Schedule(S); Premaintenance Procedures; Accessing The Tines - Toro 23515 Operation Manual

Maintenance

Recommended Maintenance Schedule(s)

Maintenance Service
Interval
After the first 8 hours
After the first 10 hours
After the first 25 hours
Before each use or daily
Every 25 hours
Every 50 hours
Every 100 hours
Every 200 hours
Every 250 hours
Every 300 hours
Yearly or before storage
CAUTION
If you leave the spark pug wire connected, someone could accidently start the engine and seriously injure
you or other bystanders.
Before performing any maintenance, park the unit on a level surface, stop the engine, and disconnect the
spark plug wire. Set the wire aside so that it does not accidentally contact the spark plug.
Premaintenance
Procedures

Accessing the Tines

The machine has a rear access panel that you can remove as
illustrated in to access and maintain the tines.
Maintenance Procedure
• Change the engine oil.
• Check the tension of the drive chains.
• Check the tension of the hydrostatic drive belt.
• Check the engine oil level.
• Lubricate the pivot arms.
• Check the tire pressure.
• Check the condition of the coring tines and replace any that are damaged or
excessively worn.
• Check for loose fasteners.
• Lubricate and check the drive chains.
• Clean the foam pre-cleaner (more frequently in dusty conditions).
• Change the engine oil.
• Check the tension of the drive chains.
• Check the tension of the hydrostatic drive belt.
• Change the oil filter.
• Inspect, clean, and adjust the spark plug; replace it if necessary.
• Replace the spark plug.
• Replace the fuel filter.
• Replace the paper air filter (more frequently in dusty conditions).
• Touch up chipped paint
13