Hand Shear Model CE 16SA Handling instructions Note: Before using this Electric Power Tool, carefully read through these HANDLING INSTRUCTIONS to ensure efficient, safe operation. It is recommended that these INSTRUCTIONS be kept readily available as an important reference when using this power tool.
Protective equipment such as dust mask, non- EXPLANATION OF SYMBOL skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce : Class II tool personal injuries. c) Prevent unintentional starting. Ensure the switch GENERAL POWER TOOL SAFETY WARNINGS is in the off-position before connecting to power source and/or battery pack, picking up or WARNING...
5) Service PRECAUTIONS ON USING THE HAND SHEAR a) Have your power tool serviced by a qualified repair person using only identical replacement parts. Beware of sharp panel edges. This will ensure that the safety of the power tool The edge of the plate just cut by the hand shear is maintained.
Moving Blade Stationary Blade Lock Nut M4 Thickness Gauge Cutting Edge Slotted Set Screw M4×14 Stationary Blade Fig. 4 Hexagon Socket Hd. Bolt MAINTENANCE AND INSPECTION Fig. 2 1. Inspecting the blade Using a worn or chipped blade will put an excessive 5.
CAUTION Repair, modification and inspection of Hitachi Power Tools must be carried out by a Hitachi Authorized Service Center. This Parts List will be helpful if presented with the tool to the Hitachi Authorized Service Center when requesting repair or other maintenance.
Hitachi Koki Co., Ltd. Shinagawa Intercity Tower A, 15-1, Konan 2-chome, Minato-ku, Tokyo, Japan Code No. C99126712 N Printed in Japan...