Luggage Covers - Ford FOCUS Owner's Manual

Remove the luggage cover.
Push the sliders on the cassette towards
each other and insert the telescopic bar
into the holes on the sidewall behind the
rear seatbacks.
Ensure that the end caps with the
anti-rotation pin are correctly fitted in the
side trim.
Pull up the net and insert the ends of the
bar into the retainers on the roof.
Ensure that the bar is pushed forwards into
the narrow section of the retainers.
WARNING
After installing the cassette, press
the front edge of the luggage cover
back down into its original position
(forwards) to prevent vision out of the rear
screen being obscured.
Reinstall the luggage cover.
Focus (CB8) Vehicles Built From: 03-03-2014, Vehicles Built Up To: 31-12-2014, CG3568en enGBR, Edition date: 03/2014, None
Load Carrying
Remove in the reverse order.
Cargo net
A
B
The cargo net can be used to prevent
objects sliding around.
Attach the hooks at each corner of the net
to the four retaining points on the load
floor.

LUGGAGE COVERS

172
With retaining rings
Without retaining rings
WARNING
Do not place objects on the luggage
cover.