Control Settings - scope Tactic ET10 Operating And Installation Instructions

Control Settings

OPERATION
Switch Dial:
Thermostat
Dial:
GREEN = Stand-by
RED = Power ON
Control
Cover
(opened)
Figure 1: Control Dials (viewed from top)
Freeze Guard (S)
The Freeze Guard setting, indicated by S on the thermostat dial, is
used to provide heat if the ambient temperature drops to a level close
to freezing. This setting is useful during extended periods of absence,
or for unoccupied rooms. For this setting to operate, the Switch Dial
must be set to the RED (Power ON) position.
6
GREEN = Stand-by - Turn dial to right
RED = Power ON - Turn dial to left
1 ~ 9 Thermostat setting
Freeze Guard: 7°C (approx.)
S
Table 1: Control Settings
Switch Dial
1~9 = Thermostat
S = Freeze Guard
Thermostat Dial
TACTIC.ET10, ET15 and ET20
SKOPE Airelec Convection Panel Heaters
Neon
Indicator