Safety Cut-Out - scope Tactic ET10 Operating And Installation Instructions

Safety Cutout
Your SKOPE Airelec convection heater is fitted with an auto-reset
thermal cutout. This safety device will automatically switch off the
elements should the heater reach an abnormal temperature.
Should this occur: switch off the heater immediately, and disconnect
from the power supply. Allow the heater to cool down, and check for
blockage of the air vents. Use a vacuum cleaner to clean if necessary.
If the heater still fails to operate, contact your nearest authorised
service agent.
NOTE: The heater indicator neon may still be on. Check that there is no
heat being emitted from the grilles.
Care
The heater is best wiped down, from time to time, with a damp cloth.
Do not use any abrasive cleaners.
TACTIC.ET10, ET15 and ET20
SKOPE Airelec Convection Panel Heaters
5