Table of Contents
Advertisement
5.1.2
LAN Interface Setup
Use this page to set up the local IP address and subnet mask for your router. Please select
LAN Interface Setup under the IP Config menu and follow the instructions below to enter
the LAN setting page to configure the settings you want.
1.
IP Address
The default value of LAN IP address is 192.168.1.1 for this router.
2.
Subnet Mask
Input Subnet Mask, normally it is 255.255.255.0.
3.
Default Gateway
Input ISP Default Gateway Address. If you don't know, please check with your ISP.
4.
DHCP
Enable or disable DHCP services. The DHCP server will automatically allocate an unused IP
address from the IP address pool to the requesting computer if enabled.
5.
DHCP Client Range
Define the DHCP client range and then the DHCP server will assign an IP to the requesting
computer from this range. The Show Client will display every assigned IP address, MAC
address, and expired time. The default range is 192.168.1.100 - 192.168.1.200.
54
Version 1.0.16
Advertisement
Table of Contents
