Table of Contents
Advertisement
1.
IP Address
Input your IP Address supplied by ISP. If you don't know, please check with your ISP.
2.
Subnet Mask
Input Subnet Mask, normally it is 255.255.255.0.
3.
Server IP Address
Input your Server IP Address supplied by ISP. If you don't know, please check with your ISP.
4.
User Name
Input the PPTP Account supplied by ISP, for example. If you don't know, please check with
your ISP.
5.
Password
Input the Password supplied by ISP.
6.
MTU Size
MTU stands for Maximum Transmission Unit. For PPPoE connection, the default MTU should
be provided by computer operating systems (OS). Advanced users can set the MTU
manually for increasing the internet performance. The largest number allowed is 1460 byte
7.
Request MPPE Encryption
Microsoft Point-to-Point Encryption (MPPE) encrypts data in Point-to-Point Protocol
(PPP)-based dial-up connections or Point-to-Point Tunneling Protocol (PPTP) virtual private
network (VPN) connections. 128-bit key (strong), 56-bit key, and 40-bit key (standard) MPPE
encryption schemes are supported. MPPE provides data security for the PPTP connection
that is between the VPN client and the VPN server.
8.
DNS
If ISP provides you DNS information, please select Attain DNS automatically, otherwise
select Set DNS Manually and input the DNS information into the blank.
9.
3.5G Backup
The default interval between the two connection detection is 3 minutes, and the range is from
1 to 60 minutes. Once Internet connection is disconnected, the system automatically
connects Internet via 3.5G adapter. If 3.5G signal is not available, it starts to search
downward for 3/2.75/2.5G signals until none existed.
10. Clone MAC Address
52
Version 1.0.16
Advertisement
Table of Contents
