Abit SE6 User Manual page 60

3-30
Two options are available: 1 ) 3. The default setting is 3. When the mode selected for
the parallel port mode is ECP, the DMA channel selected can be Channel 1 or Channel 3.
PWRON After PWR-Fail:
This setting lets you set the system action after a power failure. Three options are available:
On ) Former-Sts ) Off. The default setting is Off.
Game Port Address:
Three options are available: Disabled ) 201 ) 209. The default setting is 201. This item
sets the address of the onboard game port connector.
Midi Port Address:
Four options are available: Disabled ) 330 ) 300 ) 290. The default setting is 330. This
item sets the address of the onboard midi port connector.
Midi Port IRQ:
Two options are available: 5 ) 10. The default setting is 10. This item sets the IRQ of the
onboard midi port connector. If you choose disable the Midi Port Address, then this field is
not available.
If you buy the audio adapter and want to replace the use of onboard audio solution, you
have to disable three items in BIOS. Otherwise, your audio adapter may not work well.
These three items are:
AC 97 Audio set to Disabled
Game Port Address set to Disabled
Midi Port Address set to Disabled
SE6
Note
Chapter3