Abit SE6 User Manual page 18

2-8
(3) IR1: IR Header (Infrared)
(4) WOL1: Wake on LAN Header
orientation
(5) CNR Slot: Communication Network Riser Slot
SE6
There is a specific orientation for pins 1
through 5, attach the connector from the IR
KIT or IR device to the IR1 header (left row
only). This motherboard supports standard
IR transfer rates.
Note: Watch the pin position and the
orientation
If you have a network adapter that supports
this feature, then you can connect the
specific cable from the network adapter to
this header. This feature lets you wake up
your computer via remote control through a
local area network. You may need a specific
utility to control the wake up event, such as
the PCnet Magic Packet utility or other
similar utilities.
Note: Watch the pin position and the
This slot is used for an optional CNR with
the main objective of reducing the baseline
implementation cost of features that are
widely used in the "Connected PC", while
also addressing
limitations of today's audio, modem, and
LAN subsystems.
Chapter2
specific functional