Power Precautions - HP J4091A Installation And Reference Manual

HP 100Base-T Hub 8 Installation and Reference Guide
Note: If your installation requires a different power cord than the one supplied with
the hub, be sure to use a power cord displaying the mark of the safety agency
that defines the regulations for power cords in your country. The mark is your
assurance that the power cord can be used safely with the hub.
Do not install the hub in an environment where the operating ambient tempera-
ture might exceed 45×C (113×F).

Power Precautions

Follow these precautions when unplugging and plugging in power to the
hub.
Caution
Use only the power adapter supplied with the HP 100Base-T Hub 8. Using
other adapters, including those meant for other HP networking equipment,
may result in damage to the equipment and will void the warranty.
Note
The hub does not have a power switch; it is powered on when the power
connector is plugged in.
When installing the hub, note that an AC outlet must be installed near the
equipment and should be easily accessible.
D-2 Safety and Regulatory Statements