Safety Information - HP J4091A Installation And Reference Manual

HP 100Base-T Hub 8 Installation and Reference Guide

Safety Information

Documentation reference symbol. If the product is marked with this symbol, refer to
the product documentation to get more information about the product.
WARNING A WARNING in the manual denotes a hazard that can cause injury or death.
CAUTION A CAUTION in the manual denotes a hazard that can damage equipment.
Do not proceed beyond a WARNING or CAUTION notice until you have understood
the hazardous conditions and have taken appropriate steps.
Grounding
These are safety class I products and have protective earthing terminals.
There must be an uninterruptible safety earth ground from the main power
source to the product's input wiring terminals, power cord, or supplied
power cord set. Whenever it is likely that the protection has been impaired,
disconnect the power cord until the ground has been restored.
For LAN cable grounding:
If your LAN covers an area served by more than one power distribution
system, be sure their safety grounds are securely interconnected.
LAN cables may occasionally be subject to hazardous transient voltages
(such as lightning or disturbances in the electrical utilities power grid).
Handle exposed metal components of the network with caution.
Servicing
There are no user-serviceable parts inside these products. Any servicing,
adjustment, maintenance, or repair must be performed only by service-
trained personnel.
These products do not have a power switch; they are powered on when the
power cord is plugged in.
Safety and Regulatory Statements D-3