Editing Vlan Groups; Vlan Database - Accton Technology ES4512C Management Manual

Editing VLAN Groups

Command

vlan database

vlan
vlan database
This command enters VLAN database mode. All commands in this mode will take
effect immediately.
Default Setting
None
Command Mode
Global Configuration
Command Usage
• Use the VLAN database command mode to add, change, and delete VLANs.
After finishing configuration changes, you can display the VLAN settings by
entering the show vlan command.
• Use the interface vlan command mode to define the port membership mode
and add or remove ports from a VLAN. The results of these commands are
written to the running-configuration file, and you can display this file by
entering the show running-config command.
Example
Console(config)#vlan database
Console(config-vlan)#
Related Commands
show vlan (4-181)
Table 4-53. Editing VLAN Groups
Function
Enters VLAN database mode to add, change, and delete
VLANs
Configures a VLAN, including VID, name and state
4
VLAN Commands
Mode Page
GC 4-173
VC 4-174
4-173