Double Insulation; Important Note - Titan SF823N Safety And Operating Manual

ADDITIONAL SAFETY RULES FOR YOUR PLANER
1. Always wait for the cutter to stop before setting the tool down. An exposed cutting
blade may engage the surface leading to possible loss of control and serious injury.
2. Always wear a dust mask and hearing protectors when using this planer.
3. Do not use damaged or worn blades. Use only sharp blades.
4. Periodically check the screws that hold the blades, loose blades can cause damage
to materials and injure people.
5. Do not start the machine when the blade is in contact with the workpiece.
6. Always move the planer in the cutting direction.
7. Maintain constant pressure on the front and rear of planer.
8. Always inspect and remove all nails and screws etc from timber before planing.
9. If possible, ensure the workpiece is firmly clamped to prevent movement.
10. Where possible, seal off the working area to contain the dust for later removal.
11. Always use the appropriate safety equipment that is required for the product. e.g.
Goggles/Safety Spectacles, Ear defenders(essential with tools with a noise rating of
over 85dB(A), Gloves and face masks. In all ensure that the safety equipment is in good
condition.

Double insulation:

The tool is double insulated.This means that all the external metal parts are electrically
insulated from the mains power supply. Placing insulation barriers between the electrical
and mechanical components making it unnecessary for the tool to be earthed.

Important note

Be sure the supply is the same as the voltage given on the rating plate.The tool is fitted
with a two-core cable and plug.
Remove the mains plug from socket before carrying out, any adjustment or servicing.
SYMBOLS
Read the manual
Wear dust mask,eye & ear protection
Conforms to relevant safety standards
Warning Wear gloves