Related Manuals for Titan TTB876PLN
Summary of Contents for Titan TTB876PLN
- Page 1 900W Planer TTB876PLN EAN: 5059340252247 WARNING: Read the instructions before using the product!
- Page 2 Let’s get started These instructions are for your safety. Please read through them thoroughly before use and retain them for future reference. started... Getting Technical and legal information Your product Technical Before you start more detail... Product functions Operation Care and maintenance Troubleshooting Recycling and disposal Guarantee...
- Page 3 TTB876PLN by TITAN Safety information Safety warnings General power tool safety warnings WARNING! Read all safety warnings, instructions, power tool. Failure to follow all instructions listed serious injury. Save all warnings and instructions for future reference. The term “power tool” in the warnings refers to your mains-operated (corded) power tool or battery- operated (cordless) power tool.
- Page 4 Safety information TTB876PLN by TITAN Safety warnings b) Avoid body contact with earthed or grounded surfaces, pipes, radiators, ranges refrigerators. There is an increased risk of electric shock if your body is earthed or grounded. c) Do not expose power tools to rain or wet conditions.
- Page 5 TTB876PLN by TITAN Safety information c) Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power source and/or battery pack, picking up or carrying the tool. switch or energising power tools that have the switch on invites accidents.
- Page 6 Safety information TTB876PLN by TITAN Safety warnings c) Disconnect the plug from the power source and/ or remove the battery pack, if detachable, from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.
- Page 7 TTB876PLN by TITAN Safety information 5) Service repair person using only identical replacement parts. This will ensure that safety of the power tool is maintained. Safety instructions for planers a) Wait for the cutter to stop before setting the tool down.
-
Page 8: Safety Warnings
Safety information TTB876PLN by TITAN Safety warnings h) Always ensure that the power cable trails out behind the tool to prevent the risk of it becoming snagged by the rotating roller and blades. Risk of injury or electrocution. Additional safety warnings a) Be aware of kickback. - Page 9 TTB876PLN by TITAN Safety information - Any pre 1960 building may have paint containing lead on wood or metal surfaces. If you suspect workpiece contains lead seek professional advice. h) Some wood and wood type products especially MDF (Medium Density Fibreboard) can produce dust that can be hazardous to your health.
- Page 10 Safety information TTB876PLN by TITAN Safety warnings To protect the lung, the COSHH Regulations sets a limit on the amount of these dusts that you can breathe (called a Workplace Exposure Limit or WEL) when averaged over a normal working day. These limits are not a large amount of dust: when compared to a penny it is tiny –...
- Page 11 TTB876PLN by TITAN Safety information WARNING! Some dust particles created by power sanding, sawing, grinding, drilling and other construction jobs contain chemicals known to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are: • Lead from lead-based paints.
- Page 12 Safety information TTB876PLN by TITAN Safety warnings The declared vibration emission value has been measured in accordance EN 62841-1 and EN 62841-2-14 and may be used to compare one tool with another. The declared vibration emission value may also be used in a preliminary assessment of exposure.
- Page 13 TTB876PLN by TITAN Safety information WARNING! Identify safety measures to protect the operator that are based on an estimation of exposure in the actual conditions of use (taking account of all parts of the operating cycle such as the times when the tool is switched off and when it is running idle in addition to the trigger time).
- Page 14 Safety information TTB876PLN by TITAN Safety warnings c) Use correct attachments for the product and ensure they are in good condition. d) Keep tight grip on the handles/grip surface. e) Maintain this product in accordance with these instructions and keep it well lubricated (where appropriate).
- Page 15 TTB876PLN by TITAN Safety information Residual risks Even if you are operating this product in accordance with all the safety requirements, potential risks of injury and damage remain. The following dangers can arise in connection with the structure and design...
-
Page 16: Your Product
Your product TTB876PLN by TITAN Your product... - Page 17 TTB876PLN by TITAN 1. Lock-off button 11. Wing nut 20. Hex bolts (x6) 2. On/off switch 12. Angle bracket 21. Roller 3. Handle 13. Mounting thread 22. Grub screws (x4) 4. Dust extraction (parallel guide) crossover lever 14. Mounting thread (x2) 5.
- Page 18 TTB876PLN by TITAN The sound intensity level for the operator may exceed 80 dB(A) and ear protection measures are necessary. The declared vibration value has been measured in accordance with a standard test method (according to EN 62841-1 and EN 62841-2-14) and may be used for comparing one product with another.
- Page 19 TTB876PLN by TITAN xxWyy Manufacturing date code; year of manufacturing (20xx) and week of manufacturing (Wyy) Read the instruction manual. Wear hearing protection. Wear eye protection. Wear a dust mask. Wear protective gloves. Wear protective, slip-resistant footwear. Switch the product off and disconnect it from the power supply before assembly, cleaning, adjustments, maintenance, storage and transportation.
-
Page 20: You Will Need
Before you start TTB876PLN by TITAN You will need (items not supplied) (items supplied) Suitable personal protective equipment Mounting bolt (8), wing screws (9) & wing nut (11) Parallel guide (10) Angle bracket (12) Rebate depth guide (15) Dust bag (18) -
Page 21: Parallel Guide
TTB876PLN by TITAN Before you start Fig. 1 Emptying 1. Remove the dust bag (18) from the product as described above. 2. Open the zip and empty chippings into a suitable rubbish bag. 3. Close the zip and re-attach the dust bag (18) to the product. -
Page 22: Connection To Power Supply
Before you start TTB876PLN by TITAN Parallel guide 1. Align the hole in the angle bracket (12) to the mounting thread (13) and Step 1). 2. Attach the parallel guide (10) to the angle bracket (12). Fix it with the mounting bolt (8) and wing nut (11) (Fig. - Page 23 TTB876PLN by TITAN more detail... Product functions Operation Care and maintenance Troubleshooting Recycling and disposal Guarantee EC declaration of conformity...
-
Page 24: Intended Use
Product functions TTB876PLN by TITAN Intended use This belt sander is designated with a rated input of 900 Watts. as beams and boards. It is also suitable for bevelling edges and cutting rebates. The product must be used in an upright position only with the front plate laying on a work bench. -
Page 25: Switching On/Off
TTB876PLN by TITAN Product functions / Operation lowered to minimum decreased fully position retracted for minimum cut Switching on/off 1. Press the lock-off button (1) and hold it in position. 2. Press the on/off switch (2) to switch the product on (Fig. - Page 26 Operation TTB876PLN by TITAN Planing General cutting WARNING! Always wear a dust mask to protect yourself against hazards resulting NOTE: Always make a trial cut before working on the actual workpiece, especially after replacing or adjusting the planing depth. 1. Adjust the desired planing depth.
- Page 27 TTB876PLN by TITAN Operation Fig. 10 Bevel planing With the V-groove (27) bevel angles of 45° can be cut on the edge of a workpiece. 1. Place the V-groove (27) onto the edge of the workpiece (Fig. 11). 2. Guide the product along the edge.
-
Page 28: After Use
Operation / Care and maintenance TTB876PLN by TITAN NOTE: Apply light lateral supporting pressure against the workpiece WARNING! Danger of kickback! Apply the product to the workpiece only when switched on! Rebate planing 1. Attach the parallel guide (10) and rebate depth gauge (15) to the product as described above and adjust to desired width (Fig. -
Page 29: General Cleaning
TTB876PLN by TITAN Care and maintenance 2. Regular and proper cleaning will help ensure safe use and prolong the life of the product. 3. Inspect the product before each use for worn and damaged parts. Do not WARNING! Only perform repairs and maintenance work according to... - Page 30 Care and maintenance TTB876PLN by TITAN Blade removal 4. Press the guard (24) down and hold it in position. 5. Push the blade (19) slightly with a piece of wood and then pull it out using a proper tool, e.g. pliers (Fig. 16).
-
Page 31: Maintenance
TTB876PLN by TITAN Care and maintenance NOTE: The planning surface will end up rough and uneven unless the blades are set properly and securely. The blades must be mounted so that the cutting edge is absolutely level, e.g. parallel to the surface of the back plate. - Page 32 Care and maintenance TTB876PLN by TITAN UK plug (only for UK market) IMPORTANT: The wires in the mains lead are coloured in accordance with the following code: Blue – Neutral Brown – Live As the colours of the wire in the mains lead of this product may not correspond with the coloured marking identifying the terminals in your plug, proceed as follows.
- Page 33 TTB876PLN by TITAN Care and maintenance Storage 1. Switch the product off and disconnect it from the power supply. 2. Clean the product as described above. 3. Store the product and its accessories in a dark, dry, frost-free, well-ventilated place.
-
Page 34: Troubleshooting
Troubleshooting TTB876PLN by TITAN Troubleshooting Therefore check the product using this section. In most cases the problem can be solved quickly. WARNING! Only perform the steps described within these instructions! All further inspection, maintenance and repair work must be performed... -
Page 35: Recycling And Disposal
TTB876PLN by TITAN Recycling and disposal Recycling and disposal Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority or local store for recycling advice. For further information visit www.recycle-more.co.uk. - Page 36 We take special care to select high quality materials and use manufacturing techniques that allow us to create products incorporating design and durability. This product (TITAN 900W Planer) has a manufacturer’s guarantee of 2 years against manufacturing defects, from the date of purchase (if bought in store) or date of delivery (if bought online), at no additional cost for normal (non- professional or commercial) household use.
- Page 37 TTB876PLN by TITAN EC declaration of conformity (EN) EU DECLARATION OF CONFORMITY (FR) DÉCLARATION UE DE CONFORMITÉ (PL) DEKLARACJA ZGODNOŚCI UE (RO) DECLARA IA DE CONFORMITATE UE (ES) DECLARACIÓN UE DE CONFORMIDAD (PT) DECLARAÇÃO DE CONFORMIDADE UE Product/ Produit/ Produkt/Produsul/Produkt/Producto/Produto •...
- Page 38 EC declaration of conformity TTB876PLN by TITAN 2006/42/WE w zmienionej dyrektywie maszynowej 2014/30 / UE ze zmianami Dyrektywa Kompatybilność elektromagnetyczna 2011/65 / UE ze zmianami Dyrektywa Ograniczenie stosowania niektórych niebezpiecznych substancji w sprzęcie elektrycznym i elektronicznym echipamentele electrice și electronice y electrónicos...
- Page 39 TTB876PLN by TITAN EC declaration of conformity (UK) DECLARATION OF CONFORMITY Product • 900W Planer • TTB876PLN • Serial number :00001 to 99999 Name and address of the manufacturer or his authorised representative: 3 Sheldon Square London W2 6PX United Kingdom This declaration of conformity is issued under the sole responsibility of the manufacturer.
- Page 40 Manufacturer,Fabricant,Producent,Producător,Fabricante: UK Manufacturer: Kingfisher International Products Limited 3 Sheldon Square, London, W2 6PX United Kingdom www.kingfisher.com/products EU Manufacturer: Kingfisher International Products B.V. Rapenburgerstraat 175E 1011 VM Amsterdam The Netherlands www.kingfisher.com/products www.screwfix.com To view instruction manuals online, visit www.screwfix.ie www.kingfisher.com/products www.bricodepot.fr Pour consulter les manuels d’instructions en ligne, rendez-vous sur le site www.kingfisher.com/products www.bricodepot.es...