Subscribe to Our Youtube Channel
Related Manuals for Titan TTB930PLN
Summary of Contents for Titan TTB930PLN
- Page 1 Product description Safety instructions Product description Assembly Care & maintenance Guarantee Declaration of conformity EAN 5059340451923 TTB930PLN ORIGINAL INSTRUCTIONS V80520 BX220IM...
-
Page 2: Table Of Contents
Safety instructions Product description Assembly Care & maintenance Guarantee Declaration of conformity... - Page 3 WARNING! Please read all safety warnings carefully and be sure that they are fully understood before handling the tool.
- Page 4 Product description...
-
Page 7: Safety Instructions
Safety instructions GENERAL POWER TOOL SAFETY WARNING WARNING Read all safety warnings, instructions, illustrations and Failure to follow all injury. The term “power tool” in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool. 1) WORK AREA SAFETY a) Keep work area clean and well lit. - Page 8 Protective equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries. energising power tools that have the switch on invites accidents. wrench or a key left attached to a rotating part of the power tool may result in personal injury.
- Page 9 5) SERVICE This will ensure that the safety of the power tool is maintained. SAFETY WARNINGS FOR PLANERS An exposed rotating cutter may engage the surface leading to possible loss of control and serious injury. Cutting a “live” wire may make exposed metal parts of the power tool “live”...
- Page 10 Silica is a natural mineral present in large amounts in things like sand, sandstone and granite. It is also commonly found in many construction materials such as concrete and Silica or RCS) during many common tasks such as cutting, drilling and grinding. •...
- Page 11 Some • • Crystalline silica from bricks and cement and other masonry products. • Arsenic and chromium from chemically treated timber. • • VIBRATION hand arm vibration syndrome injuries to power tool users. The directive requires power tool manufacturers and suppliers to provide indicative vibration test results to enable users to make informed decisions as to the period of time a power tool can be used safely on a daily basis and the choice of tool.
- Page 12 WARNING! The vibration emission during actual use of the power tool can differ from the declared total value depending on the ways in which the tool is used: • How the materials are grinded, cut or drilled. • If the tool is in good condition and well maintained. •...
- Page 13 Rated speed n : 11000 min : Ø 115 mm : 6 mm Diameter of wheel bore : 22.23 mm VIBRATION AND NOISE REDUCTION Spindle thread size : M 14 Protection class : || : 1.43 kg risks: 1. Only use the product as intended by its design and these instructions. Uncertainty K Vibration total value:a : 6.1 m/s...
-
Page 14: Product Description
Product description Part index On/Off switch 12. Blade 13. Rear plate Main handle 14. Roller Belt cover 15. Blade holder Parallel guide 16. Grub screws 17. V-groove 18. Front plate Cutting depth Scale 19. Dust bag Cutting depth adjustment knob the following symbols and abbreviations. - Page 15 TTB930PLN = Model number TITAN = Brand name 930 = Version Number...
-
Page 16: Assembly
Assembly Unpacking 2. Remove all packing materials and shipping devices, if applicable. that parts are missing or show damage do not use the product but contact your dealer. Using an incomplete or damaged product represents a hazard to people and property. ation. - Page 17 WARNING! when operating this product! Dust can be harmful to health! with wood preservative or a stain! 2. Open the zip and empty chippings into a suitable rubbish bag. NOTE: bag lowers the performance of the product. Dust extraction Attach the parallel guide to perform straight cuts along a workpiece edge. NOTE: The parallel guide can only be applied for planing a thickness less than 2mm.
-
Page 18: Use
Intended use beams and boards. It is also suitable for bevelling edges. the workpiece. It may not be used upside down or as stationary product on a work bench. Before you start Protection Controls WARNING! Always switch the product off and disconnect it from power supply before making any adjustments! er indicates the depth of cut in millimetres. - Page 19 Operation WARNING! Always wear a dust mask to protect yourself against hazards resulting 1. Adjust the desired planing depth. 3. Switch the product on and wait until it runs at full speed before placing it on the workpiece. WARNING! Danger of kickback! Apply the product to the workpiece only when switched on! even speed.
- Page 20 pressure against the workpiece to achieve an even result. 2. Guide the product along the edge. After use 1. Switch the product off, wait for complete stop, disconnect it from the power supply and let it cool down. 2. Check, clean and store the product as described below.
-
Page 21: Care & Maintenance
Care & maintenance WARNING! Always switch the product off, disconnect the product from the power supply and let the product cool down before performing inspection, maintenance and cleaning work! Only perform care and maintenance work according to these instructions! Clean 1. - Page 22 Maintenance instruction manual. 6. Clean all parts carefully to remove dust. blade are worn out, replace with a new pair of blades. the blade is correct and it is positioned centrally. 10. Turn the roller with a piece of wood to ensure that the planer blade does not con- tact front or rear plate.
- Page 23 Power cord If the replacement of the supply cord is necessary, this has to be done by the manufacturer or his agent in order to avoid a safety hazard. Replacement of the plug shall always be carried out by the manufacturer of the tool or his service organization and follow the instructions below.
- Page 24 Transportation WARNING! Always carry the product by its main handle. 1. Switch the product off and disconnect it from the power supply. 2. Protect the product from any heavy impact or strong vibrations which may occur during transportation in vehicles. 3.
- Page 25 Therefore check the product using this section. In most cases the problem can be solved quickly. WARNING! Only perform the steps described within these instructions! All further inspection, maintenance and repair work must be performed cannot solve the problem yourself! Solution Connect to power supply supply...
- Page 26 Recycling and disposal authority or local store for recycling advice.
-
Page 27: Guarantee
Guarantee We take special care to select high quality materials and use manufacturing techniques that allow us to create products incorporating design and durability. This product (P 650W Planer) has a manufacturer’s guarantee of 2 year against manufacturing defects, from the date of purchase (if bought in store) or date of delivery (if bought online), at no additional cost for normal (non-professional or commercial) household use. -
Page 28: Declaration Of Conformity
(UK) DECLARATION OF CONFORMITY Product 650W Planer ● TTB930PLN ● Serial number: 000001 - 999999 ● Name and address of the manufacturer or his authorised representative: Kingfisher International Products Limited 3 Sheldon Square London W2 6PX United Kingdom This declaration of conformity is issued under the sole responsibility of the manufacturer. - Page 29 (PT) DECLARAÇÃO DE CONFORMIDADE UE Product/ Produit/ Produkt/Produsul/Producto/Produto Planer / Rabot / Strug elektryczny / Rindea Electrică / Cepillo eléctrico / Plaina elétrica ● TTB930PLN ● SN: 000001 - 999999 ● Name and address of the manufacturer or his authorised representative: Nom et adresse du fabricant ou de son mandataire: Nazwa i adres producenta lub jego upoważnionego przedstawiciela:...
- Page 30 zación pertinente de la Unión: O objeto da declaração acima descrito está em conformidade com a legislação de harmoni- zação da União aplicável: 2006/42/EC as amended Machinery Directive 2014/30/EU as amended Directive Electromagnetic compatibility 2011/65/EU as amended Directive Restriction of the use of certain hazardous substances in electrical and electronic equipment 2006/42/CE en tant que directive modifiée sur les machines 2014/30 / UE telle que modifiée Directive Compatibilité...
- Page 31 EN 62841-1:2015 EN 62841-2-14:2015 EN 55014-1:2017+A11:2020 EN 55014-2:2015 EN IEC 61000-3-2:2019 EN 61000-3-3:2013+A1:2019 Authorized Signatory and technical file holder/ Signataire et responsable de la documentation technique autorisé/ Podmiot uprawniony do wystawienia i adres przechowywania dokumen- tacji technicznej/ Semnatar autorizat şi de ină torul dosarului ethnic/ Firmante autorizado y titular del expediente técnico/Signatário autorizado e detentor da ficha técnica: Kingfisher International Products B.V.,...
- Page 32 Manufacturer • Fabricant • Producent • Producator • Fabricante: Kingfisher International Products Limited, 3 Sheldon Square, London, W2 6PX, United Kingdom www.kingfisher.com/products Kingfisher International Products B.V. Rapenburgerstraat 175E 1011 VM Amsterdam The Netherlands www.diy.com www.screwfix.com www.screwfix.ie To view instruction manuals online, visit www.kingfisher.com/products...
Need help?
Do you have a question about the TTB930PLN and is the answer not in the manual?
Questions and answers