Panasonic KX-TG5621 Quick Manual page 5

TG562x_QG(e).fm Page 5 Tuesday, December 13, 2005 2:57 PM
Quick troubleshooting
2 No dial tone is heard from handset.
Lift up the handset from the base unit
or charger.
Press {C} (TALK) at the handset,
then check if the display shows
"Talk".
"No
No link to base.
Move
Move closer to
base, try again.
base,
is displayed.
Try remedy for 1
on previous page.
Your telephone may need service.
Please visit http://www.panasonic.com/phonehelp for further
troubleshooting.
link to base.
closer to
try again."
Press {s} (SP-PHONE),
then check if the dial
tone is heard from the
speaker on the back.
No dial tone
Check the telephone
cord is properly
connected to both
the base unit and
telephone jack on
the wall.
Still no dial tone
– –
5
{C}
"Talk" is
Talk
K(VE)
MuteL
displayed.
{s}
Dial tone is heard.
Your telephone may
need service when
only back speaker
provides a dial tone.